PLAYBACK
c4_sf14.html
4
pages/c4_sf13_ss2.html
pages/c4_sf14_ss1.html
PLAYBACK
Controlling the unit from a web browser (web
control)
4
Settings
screen
Network
MAC Address Filter
AV CONTROLLER
Controlling the unit from a web browser (web
control)
You
can control the unit with the web control screen displayed in a
web browser.
- To use
this function, the unit and your PC must be connected to the same
router.
- Some
security software installed on your PC may block the access of the
unit to your PC. In these cases, configure the security software
appropriately.
- To
display the web control screen or turn on the unit from the web
control when the unit is in standby mode, set “Network Standby” () to “On”.
- We
recommend using one of the following web browsers.
- Internet Explorer 11.x
- Safari 9.x
- Start
the web browser.
- Enter
the IP address of the unit in the address bar of the web browser.
(Example)
- You
can check the IP address of the unit in “Network” in the “Information” menu.
- You
can bookmark the unit’s IP address in the browser or create a shortcut
link () to access
the web control screen quickly in the future. However, if you are
using a DHCP server, the IP address of the unit may change each
time the unit is turned on.
- If
you have enabled the MAC Address Filter,
you need to specify the MAC address of your PC to allow the PC to
access the unit. For information on how to check the MAC address
of your PC, refer to its instruction manual.
- By
using the application for smartphone/tablet “AV CONTROLLER”, you can
control the unit from an iPhone, iPad, iPod touch or Android devices
().
- Top
menu screen
- Control
screen
- Settings
screen
