CONFIGURATIONS c5_sf1.html 5 pages/c5_sf1.html pages/c5_sf2.html RcGroup-Cursor_keys RcGroup-Cursor_x5F_keys RcGroup-Cursor_keys RcGroup-Cursor_x5F_keys RcGroup-Cursor_keys RcGroup-Cursor_x5F_keys RcGroup-Cursor_keys RcGroup-Cursor_x5F_keys RcGroup-Cursor_keys RcGroup-Cursor_x5F_keys RcGroup-Cursor_keys RcGroup-Cursor_x5F_keys CONFIGURATIONS Configuring input sources (Input menu) Input menu items 7 Rename/Icon Select Decoder Mode Volume Interlock DMC Control Balance Input Attenuator Ultra Low Jitter PLL Mode Connecting audio devices (such as CD players)

Configuring input sources (Input menu)

Input menu items

Item
Function
Page
Rename/Icon Select
Changes the input source name and icon.
Decoder Mode
Sets the format of digital audio playback to DTS.
Volume Interlock
Enables/disables volume controls from iTunes/iPod via AirPlay.
DMC Control
Selects whether to allow a DLNA-compatible Digital Media Controller (DMC) to control playback.
Balance Input Attenuator
(RX-A3070 only)
Selects whether to activate the attenuator for the balance input to avoid sound distortion.
Ultra Low Jitter PLL Mode
(RX-A3070 only)
Enables/disables the jitter elimination function.
  1. Rename/Icon Select
  2. Decoder Mode
  3. Volume Interlock
  4. DMC Control
  5. Balance Input Attenuator
  6. Ultra Low Jitter PLL Mode

Rename/Icon Select

Changes the input source name and icon displayed on the front display or TV screen.
Some network input sources (such as “AirPlay”) cannot be renamed or have the icons changed.
    Setup procedure
  1. Use the cursor keys (e/r) to select “Auto” or “Manual” and press the cursor key (w).
    If you select “Auto”, the unit creates a name automatically according to the connected device. In this case, skip Steps 3 and 4.
    This step is available only when “AV1-7”, “VIDEO AUX” or “AUDIO1-3” (available only when any audio digital input jack is assigned) is selected.
  2. Use the cursor keys (e/r) to select an icon and press the cursor key (w).
  3. Press ENTER to enter the name edit screen.
  4. Use the cursor keys and ENTER to rename and select “ENTER” to confirm the entry.
    To clear the entry, select “CLEAR”.
  5. Use the cursor keys to select “OK” and press ENTER.
    To restore the default setting, select “RESET”.
  6. To exit from the menu, press ON SCREEN.

Decoder Mode

Sets the format of digital audio playback to “DTS”.
For example, if the unit does not detect DTS audio and outputs noise, set “Decoder Mode” to “DTS”.
Input sources
AV 1-7, VIDEO AUX, AUDIO 1-4 (available only when any audio digital input jack is assigned)
AUDIO 4: RX-A3070 only
Settings
Auto
Automatically selects an audio format to match the input audio signal.
DTS
Selects DTS only. (Other audio signals are not reproduced.)

Volume Interlock

Enables/disables volume controls from iTunes/iPod via AirPlay.
Input sources
AirPlay
Settings
Off
Disables volume controls from iTunes/iPod.
Limited
Enables volume controls from iTunes/iPod within the limited range (-80 dB to -20 dB and mute).
Full
Enables volume controls from iTunes/iPod in the full range (-80 dB to +16.5 dB and mute).

DMC Control

Selects whether to allow DLNA-compatible Digital Media Controller (DMC) to control playback.
Input source
SERVER
Settings
Disable
Does not allow DMCs to control playback.
Enable
Allows DMCs to control playback.
A Digital Media Controller (DMC) is a device that can control other network devices through the network. When this function is enabled, you can control playback of the unit from DMCs (such as Windows Media Player 12) on the same network.

Balance Input Attenuator

(RX-A3070 only)
Selects whether to activate the attenuator for the balance input (AUDIO 4) so that you can avoid sound distortion when high-level signals are input.
Activate the attenuator when connecting an audio device which outputs signals of 3 V (RMS) or higher to the AUDIO 4 (XLR balanced input) jacks ().
Input source
AUDIO 4
Settings
Bypass
Does not activate the attenuator for the balance input.
ATT.(-6dB)
Activates the attenuator for the balance input to reduce the signal level (-6dB).

Ultra Low Jitter PLL Mode

(RX-A3070 only)
Enables/disables the jitter elimination function.
Input source
AV 1-7, VIDEO AUX, AUDIO 1-4 (available only when any audio digital input jack is assigned), (network sources), Bluetooth, USB
Settings
Off
Disables the jitter elimination function.
Level 1, Level 2, Level 3
Enables the jitter elimination function.
The higher level enhances the DAC accuracy, but may cause audio interruptions on some playback devices depending on the audio clock conditions. In this case, select lower level.