CONFIGURATIONS c5_sf4.html 5 pages/c5_sf4_ss3.html pages/c5_sf4_ss5.html RcGroup-Cursor_keys RcGroup-Cursor_x5F_keys RcGroup-Cursor_keys RcGroup-Cursor_x5F_keys RcGroup-Cursor_keys RcGroup-Cursor_x5F_keys CONFIGURATIONS Configuring various functions (Setup menu) Video 1 Removing the limitation on HDMI video output (MONITOR CHECK)

Configuring various functions (Setup menu)

Video

Configures the video output settings.
  1. Video Mode

Video Mode

Enables/disables the video signal processing (resolution, aspect ratio and video adjustments).
Settings
Direct
Disables the video signal processing.
Processing
Enables the video signal processing.
Configure the settings in “Resolution”, “Aspect” and “Adjustment”.
When “Video Mode” is set to “Direct”, the unit transmits video signals with the least circuitry in order to reduce video output delay.

Resolution

Selects a resolution to output HDMI video signals when “Video Mode” is set to “Processing”.
Settings
Through
Does not convert the resolution.
Auto
Selects a resolution automatically in accordance with TV resolution.
480p/576p, 720p, 1080i, 1080p, 4K
Output video signals with a selected resolution.
(Only the resolutions supported by your TV are selectable.)
If you need to select a resolution that is not supported by your TV, set “MONITOR CHECK” () in the “ADVANCED SETUP” menu to “SKIP” and try again. (Note that the output video may not be displayed on your TV normally.)

Aspect

Selects an aspect ratio to output HDMI video signals when “Video Mode” is set to “Processing”.
Settings
Through
Does not convert the aspect ratio.
16:9 Normal
Outputs 4:3 video signals to a 16:9 TV with black bands on either side of the screen.
This setting functions only when 480i/576i or 480p/576p signals are converted into 720p, 1080i, 1080p, or 2160p (4K) signals.

Adjustment

Configures the video adjustments when “Video Mode” is set to “Processing”. You can register the video adjustments as presets (up to 6).
The video adjustments work on the video signals with 1080p or lower resolution.
    Setup procedure
  1. Use the cursor keys (q/w) to select a preset number and press ENTER.
  2. Use the cursor keys (q/w) to select an item.
  3. Use the cursor keys (e/r) to select a setting and press ENTER.
  4. To exit from the menu, press ON SCREEN.
Detail Enhancement
Adjusts the enhancement effect of video details.
Setting range
0 to 50
Edge Enhancement
Adjusts the enhancement effect of video edges.
Setting range
0 to 50
Brightness
Adjusts the video brightness.
Setting range
-100 to 0 to +100
Contrast
Adjusts the video contrast.
Setting range
-100 to 0 to +100
Saturation
Adjusts the video saturation.
Setting range
-100 to 0 to +100