CONFIGURATIONS c5_sf4.html 5 pages/c5_sf4_ss5.html pages/c5_sf4_ss7.html RcGroup-Cursor_keys RcGroup-Cursor_x5F_keys RcGroup-Cursor_keys RcGroup-Cursor_x5F_keys RcGroup-Cursor_keys RcGroup-Cursor_x5F_keys RcGroup-Cursor_keys RcGroup-Cursor_x5F_keys RcGroup-Cursor_keys RcGroup-Cursor_x5F_keys RcGroup-Cursor_keys RcGroup-Cursor_x5F_keys RcGroup-Cursor_keys RcGroup-Cursor_x5F_keys RcGroup-Cursor_keys RcGroup-Cursor_x5F_keys RcGroup-Cursor_keys RcGroup-Cursor_x5F_keys RcGroup-Cursor_keys RcGroup-Cursor_x5F_keys RcGroup-Cursor_keys RcGroup-Cursor_x5F_keys CONFIGURATIONS Configuring various functions (Setup menu) Network 5 Connecting the network cable Connecting the unit to a wireless network Connecting a mobile device to the unit directly (Wireless Direct) Playing back iTunes/iPod music with AirPlay DMC Control

Configuring various functions (Setup menu)

Network

Configures the network settings.
  1. Network Connection
  2. IP Address
  3. Network Standby
  4. MAC Address Filter
  5. Network Name
  6. MusicCast Link Power Interlock

Network Connection

Selects the network connection method.
Settings
Wired
Select this option when you want to connect the unit to a network with a commercially-available network cable ().
Wireless (Wi-Fi)
Select this option when you want to connect the unit to a network via the wireless router (access point). For details on settings, see “Connecting the unit to a wireless network”.
Wireless Direct
Select this option when you want to connect a mobile device to the unit directly. For details on settings, see “Connecting a mobile device to the unit directly (Wireless Direct)”.

IP Address

Configures the network parameters (such as IP address).

DHCP

Select whether to use a DHCP server.
Settings
Off
Does not use a DHCP server. Configure the network parameters manually. For details, see “Manual network settings”.
On
Uses a DHCP server to automatically obtain the unit’s network parameters (such as IP address).
    Manual network settings
  1. Set “DHCP” to “Off”.
  2. Use the cursor keys (q/w) to select a parameter type and press ENTER.
    IP Address
    Specifies an IP address.
    Subnet Mask
    Specifies a subnet mask.
    Default Gateway
    Specifies the IP address of the default gateway.
    DNS Server (P)
    Specifies the IP address of the primary DNS server.
    DNS Server (S)
    Specifies the IP address of the secondary DNS server.
  3. Use the cursor keys (e/r) to move the edit position and the cursor keys (q/w) to select a value.
  4. To confirm the setting, press ENTER.
  5. To configure another network parameter, repeat steps 2 to 4.
  6. To save the changes, use the cursor keys to select “OK” and press ENTER.
  7. To exit from the menu, press ON SCREEN.

Network Standby

Selects whether the unit can be turned on from other network devices (network standby).
Settings
Off
Disables the network standby function.
On
Enables the network standby function.
(The unit consumes more power than when “Off” is selected.)
Auto
Enables the network standby function.
(If “Network Connection” is set to “Wired”, the unit is set to the power saving mode when the network cable is disconnected.)
With an advanced energy saving design, this product achieves a low power consumption of not more than two watts when in Network Standby mode.

MAC Address Filter

Sets the MAC address filter to limit access to the unit from other network devices.

Filter

Enables/disables the MAC address filter.
Settings
Off
Disables the MAC address filter.
On
Enables the MAC address filter. In “MAC Address 1-10”, specify the MAC addresses of the network devices that will be permitted access to the unit.
AirPlay () and DMC () operations are not subject to the MAC address filter.

MAC Address 1-10

Specifies the MAC addresses (up to 10) of the network devices that will be permitted access to the unit when “Filter” is set to “On”.
    Procedure
  1. Use the cursor keys (q/w) to select “MAC Address 1-5” or “MAC Address 6-10” and press ENTER.
  2. Use the cursor keys (q/w) to select an MAC address number and press ENTER.
  3. Use the cursor keys (e/r) to move the edit position and the cursor keys (q/w) to select a value.
  4. To confirm the setting, press ENTER.
  5. To save the changes, use the cursor keys to select “OK” and press ENTER.
  6. To exit from the menu, press ON SCREEN.

Network Name

Edits the network name (the unit’s name on the network) displayed on other network devices.
    Setup procedure
  1. Press ENTER to enter the name edit screen.
  2. Use the cursor keys and ENTER to rename and select “ENTER” to confirm the entry.
    To clear the entry, select “CLEAR”.
  3. Use the cursor keys to select “OK” and press ENTER.
    To restore the default setting, select “RESET”.
  4. To exit from the menu, press ON SCREEN.

MusicCast Link Power Interlock

Selects whether turning on the power of the master device of the MusicCast network (the unit) also turns on the power of other devices of the network.
Settings
Off
Disables the power interlock from the unit (MusicCast master).
On
Enables the power interlock from the unit (MusicCast master).