CONFIGURATIONS
c5_sf7.html
5
pages/c5_sf6_ss13.html
pages/c5_sf7_ss1.html
CONFIGURATIONS
Controlling external devices with the remote
control
0
Controlling external devices with the remote
control
You
can use the unit’s remote control to operate external devices (such
as BD/DVD players) if you have registered the remote control code
of the external device.
- You
cannot control an external device that does not have a remote control
sensor.
- Ensure
that the remote control ID of the external device is set to “ID1”.
If any other ID is selected, the remote control operations may not
work properly.
- If
the unit’s remote control is without batteries for more than 2 minutes,
the registered codes may be cleared. If this happens, insert new
batteries and register the codes again.
Under
the unit’s default settings, the amplifier code (Yamaha: 5098) is
set for all the input selection keys. With this setting, you can
control HDMI Control-compatible devices connected to the unit with
the remote control. (This function may not work depending on the
specification of the external device.)
- Registering
the remote control code for a TV
- Registering
the remote control codes for playback devices
- Resetting
remote control codes