CONFIGURATIONS c5_sf7.html 5 pages/c5_sf7_ss1.html pages/c5_sf7_ss3.html RcButton-CODE_SET RcButton-CODE_x5F_SET RcButton-SOURCE RcGroup-Input_selection_keys RcGroup-Input_x5F_selection_x5F_keys RcGroup-Numeric_keys RcGroup-Numeric_x5F_keys RcButton-SOURCE RcButton-SOURCE RcButton-RECEIVER RcButton-RECEIVER RcButton-SOURCE RcButton-SOURCE_z RcButton-SOURCE_x5F_z RcGroup-Menu_operation_keys RcGroup-Menu_x5F_operation_x5F_keys RcGroup-Cursor_keys RcGroup-Cursor_x5F_keys RcButton-DISPLAY RcGroup-External_device_operation_keys RcGroup-External_x5F_device_x5F_operation_x5F_keys RcGroup-Numeric_keys RcGroup-Numeric_x5F_keys RcGroup-TV_operation_keys RcGroup-TV_x5F_operation_x5F_keys CONFIGURATIONS Controlling external devices with the remote control Registering the remote control codes for playback devices 2 Registering a scene TV operations

Controlling external devices with the remote control

Registering the remote control codes for playback devices

You can use the unit’s remote control to operate playback devices if you have registered their remote control codes. You can also use the input selection keys to change the playback devices that are controlled by the remote control, because their remote control codes are assigned to the input selection keys.
  1. See “List of remote control codes” (p.198) to find the remote control code for your playback device.
    If there are multiple remote control codes, register the first code in the list. If that does not work, try the other codes.
  2. Press CODE SET.
    SOURCE blinks twice.
    Perform each of the following steps within 1 minute. Otherwise, the setting will be canceled. If this happens, repeat from Step 2.
  3. Press the input selection key.
    For example, press AV 1 to set the remote control code for the playback device connected to the AV 1 jack.
  4. Use the numeric keys to enter the 4-digit remote control code.
Once the remote control code is registered successfully, SOURCE blinks twice.
If it blinks six times, registration has failed. Repeat from Step 2.
For details on how to register a remote control code to a SCENE key, refer to “Registering a scene”.
  1. Playback device operations

Playback device operations

Once you have registered the remote control code for your playback device, you can control it using the following keys after selecting the input source or scene.
By pressing SOURCE or RECEIVER, you can switch the devices (the unit or external device) that are operated by the menu operation keys, DISPLAY and numeric keys. You can operate the unit after pressing RECEIVER (lights up in orange), and an external device after pressing SOURCE (lights up in green). For example, if you register the remote control code of your external device on TUNER, you can operate the unit’s built-in FM/AM radio after pressing RECEIVER and the external device after pressing SOURCE.
SOURCE z
Turns on/off the playback device.
Menu operation keys
Cursor keys
Select an item.
ENTER
Confirms a selected item.
RETURN
Returns to the previous screen.
DISPLAY
Switches information on the display.
External device operation keys
TOP MENU
Displays the top menu.
POP‑UP/MENU
Displays the pop-up menu.
s
Stops playback.
d
Stops playback temporarily.
a
Starts playback of the selected song/video.
h
Searches forward/backward (by holding down).
j
f
Skips forward/backward.
g
Numeric keys
Enter numerical values.
TV operation keys
Control the TV ().
These keys work only if the corresponding function is available on your playback device and if the device can be operated with an infrared remote control.