CONFIGURATIONS c5_sf7.html 5 pages/c5_sf7_ss2.html pages/c5_sf8.html RcButton-CODE_SET RcButton-CODE_x5F_SET RcGroup-Input_selection_keys RcGroup-Input_x5F_selection_x5F_keys RcGroup-Numeric_keys RcGroup-Numeric_x5F_keys RcButton-SOURCE RcButton-CODE_SET RcButton-CODE_x5F_SET RcButton-RECEIVER RcGroup-Numeric_keys RcGroup-Numeric_x5F_keys CONFIGURATIONS Controlling external devices with the remote control Resetting remote control codes 0

Controlling external devices with the remote control

Resetting remote control codes

You can reset a remote control code registered to each input selection key.
  1. Press CODE SET.
    SOURCE blinks twice.
    Perform each of the following steps within 1 minute. Otherwise, the setting will be canceled. If this happens, repeat from Step 1.
  2. Press the input selection key.
  3. Use the numeric keys to enter “5098”.
Once the remote control code is reset successfully, SOURCE blinks twice.
If it blinks six times, resetting has failed. Repeat from Step 1.
To reset the remote control to factory default settings
  1. Press CODE SET.
  2. Press RECEIVER.
  3. Use the numeric keys to enter “9981”.