CONFIGURATIONS
c5_sf7.html
5
pages/c5_sf6_ss11.html
pages/c5_sf7_ss1.html
CONFIGURATIONS
Updating the unit’s
firmware via the network
2
Updating the firmware
(UPDATE)
Configuring the system settings (ADVANCED SETUP menu)
Updating the unit’s
firmware via the network
New firmware that provides additional features or product
improvements will be released as needed. If the unit is connected
to the Internet, you can download the firmware via the network and
update it.
Note
- Do not operate the unit or disconnect
the power cable or network cable during firmware update. Firmware
update takes about 20 minutes or more (depending on your Internet
connection speed).
- If the Internet connection speed is slow, or the
unit is connected to the wireless network, network update may not
be possible depending on the condition of the wireless connection.
In this case, update the firmware using the USB memory device ().
- To perform the following procedure, your TV must
be connected to the unit via HDMI. If not, perform the update from
the “ADVANCED SETUP” menu ().
- For details on update, visit the Yamaha website.
- You can also update the firmware using the USB memory device
from the “ADVANCED SETUP” menu ().
- The firmware update indicator on the front display
lights up when a firmware update is available via the network.
A firmware update is available if the following message is
displayed after ON SCREEN is pressed.
- Updating the unit’s firmware
immediately
- Updating the unit’s firmware
at power off
