CONFIGURATIONS c5_sf4.html 5 pages/c5_sf4_ss2.html pages/c5_sf4_ss4.html CONFIGURATIONS Configuring various functions (Setup menu) Sound 3 Lipsync Adjustment (Lipsync Adj.) Enjoying pure high fidelity sound (Pure Direct) Enjoying stereoscopic sound fields (CINEMA DSP HD3)

Configuring various functions (Setup menu)

Sound

Configures the audio output settings.
  1. Lipsync
  2. Dynamic Range
  3. Max Volume
  4. Initial Volume
  5. Pure Direct Mode
  6. Adaptive DSP Level
  7. CINEMA DSP 3D Mode
  8. Virtual Presence Speaker
  9. Virtual Surround Back Speaker
  10. DAC Digital Filter
  11. Object Decode Mode

Lipsync

Adjusts the delay between video and audio by holding up the audio output.

Delay Enable

Enables/disables the Lipsync adjustment for each input source.
Choices
AV 1-7, VIDEO AUX, AUDIO 1-4*
AUDIO 4: RX-V3083 only
Settings
Disable
Disable the Lipsync adjustment for the selected input source.
Enable
Enables the Lipsync adjustment for the selected input source.

Auto/Manual Select

Selects the method to adjust the delay between video and audio output.
Setting range
Auto
Adjusts the delay between video and audio output automatically when a TV that supports an automatic lipsync function is connected to the unit via HDMI.
If necessary, you can fine-adjust the audio output timing in “Adjustment”.
Manual
Select this option when you want to adjust the delay between video and audio output manually.
Adjust the audio output timing in “Adjustment”.
Even if “Auto/Manual Select” is set to “Auto”, the automatic adjustment does not work depending on the TV connected to the unit. In this case, adjust the delay manually in “Adjustment”.

Adjustment

Adjusts the delay between video and audio output manually when “Auto/Manual Select” is set to “Manual”. You can fine-adjust the audio output timing when “Auto/Manual Select” is set to “Auto”.
Setting range
0 ms to 500 ms (1 ms increments)
  • When “Auto/Manual Select” is set to “Auto”, “Offset” shows the difference between automatic adjustment and fine adjustment.
  • This setting is also available in “Lipsync Adjustment” () in the “Option” menu.

Dynamic Range

Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback.
Settings
Maximum
Produces audio without adjusting the dynamic range.
Standard
Optimizes the dynamic range for regular home use.
Minimum/Auto
Sets the dynamic range for clear sound even at night or at low volumes.
When playing back Dolby TrueHD signals, the dynamic range is automatically adjusted based on the input signal information.

Max Volume

Sets the limit value of the volume.
Setting range
-30.0 dB to +15.0 dB (5.0 dB increments), +16.5 dB

Initial Volume

Sets the initial volume when the receiver is turned on.
Settings
Off
Sets the level to the volume level of the unit when it last entered standby mode.
On
Sets at Mute or the specified volume level (-80.0 dB to +16.5 dB, 0.5 dB increments).
(Specify a volume level which is lower than the “Max Volume” setting.)

Pure Direct Mode

Selects whether to output video signals during the Pure Direct mode ().
Settings
Auto
Automatically outputs video signals when any videos are input from the selected input source or an input source that can be operated with the on-screen display is selected. When no video signals are input, the wall paper is displayed.
Video Off
Does not output video signals including the wall paper.

Adaptive DSP Level

Selects whether to automatically adjust the CINEMA DSP effect level.
Settings
Off
Does not adjust the effect level automatically.
On
Adjusts the effect level automatically according to the YPAO measurement results and the volume level.

CINEMA DSP 3D Mode

Enables/disables CINEMA DSP HD3 (). If this function is set to “On”, CINEMA DSP HD3 functions with the selected sound programs (except 2ch Stereo and 9ch Stereo).
Settings
Off
Disables CINEMA DSP HD3.
On
Enables CINEMA DSP HD3.

Virtual Presence Speaker

Selects whether to create Virtual Presence Speaker (VPS) using the front, center, and surround speakers. When VPS is enabled, the unit creates front VPS when no front presence speakers are connected, and creates rear VPS when front presence speakers are connected but no rear presence speakers ().
Settings
Off
Disables Virtual Presence Speaker (VPS).
On
Enables Virtual Presence Speaker (VPS).
Depending on the installation height of the surround speakers, VPS may not be effective. In this case, set “Virtual Presence Speaker” to “Off”.

Virtual Surround Back Speaker

Selects whether to create Virtual Surround Back Speaker (VSBS) using the surround speakers. When VSBS is enabled, the unit creates VSBS when no surround back speakers are connected.
Settings
Off
Disables Virtual Surround Back Speaker (VSBS).
On
Enables Virtual Surround Back Speaker (VSBS).
VSBS is effective only when 6.1- or 7.1-channel content is played back.

DAC Digital Filter

(RX-V3083 only)
Selects the digital filter type of the audio DAC (digital-to-analog converter) to have favorite sounds.
Settings
Sharp Roll-off Type
Removes out-of-band noises by the filter with steep attenuation characteristics.
It has a tendency to produce clear sounds.
Slow Roll-off Type
Removes out-of-band noises by the filter with gentle attenuation characteristics.
It has a tendency to produce soft sounds.
Short Latency Type
Reduces the audio delay caused by the DAC internal digital filter.
It has a tendency to produce responsive and rhythmical sounds.

Object Decode Mode

Enables/disables playback of object-based audio signals such as Dolby Atmos or DTS:X contents.
Settings
Disable
Disables playback of object-based audio signals. Those signals will be played in normal 5.1-/7.1-channel audio.
Enable
Enables playback of object-based audio signals.
If audio output is not available when Dolby Atmos or DTS:X signals are input, set “Object Decode Mode” to “Enable”.