FEATURES c2_sf2.html 2 pages/c2_sf2_ss1.html pages/c2_sf2_ss3.html FEATURES Part names and functions Front panel (RX‑V681) 20 HDMI Control Standby Through Network Standby Optimizing the speaker settings automatically (YPAO) Controlling Zone2 Operating range of the remote control Switching information on the front display Using the WPS push button configuration Registering a radio station Selecting a preset station Selecting a frequency for reception Front display (indicators) Enjoying pure high fidelity sound (Pure Direct) Tone Control (Tone Control) Selecting the input source and favorite settings with one touch (SCENE) Selecting the sound mode Playing back in original channels (straight decode) Adding the unit to the MusicCast network HDMI connection Connecting a USB storage device

Part names and functions

Front panel (RX‑V681)

  1. MAIN ZONE z key
    Turns on/off (standby) the unit.
  2. Standby indicator
    Lights up when the unit is in standby mode under any of the following conditions.
    • HDMI Control is enabled ()
    • Standby Through is enabled ()
    • Network Standby is enabled ()
  3. YPAO MIC jack
    For connecting the supplied YPAO microphone ().
  4. ZONE 2 key
    Enables/disables the audio output to Zone2 ().
  5. Remote control sensor
    Receives remote control signals ().
  6. ZONE CONTROL key
    Changes the zone (main zone or the Zone2) that is controlled by the keys and knobs on the front panel ().
  7. INFO (WPS) key
    Selects the information displayed on the front display ().
    Enters the wireless network connection setup (WPS push button configuration) by holding down for 3 seconds ().
  8. MEMORY key
    Registers FM/AM radio stations as preset stations ().
  9. PRESET keys
    Select a preset FM/AM radio station ().
  10. FM and AM keys
    Switch between FM and AM ().
  11. Front display
    Displays information ().
  12. TUNING keys
    Select the radio frequency ().
  13. PURE DIRECT key
    Enables/disables Pure Direct ().
  14. PHONES jack
    For connecting headphones.
  15. INPUT keys
    Select an input source.
  16. TONE CONTROL key
    Adjusts the high-frequency range and low-frequency range of output sounds ().
  17. SCENE keys
    Select the registered input source, sound program, and various settings with one touch. Also, turns on the unit when it is in standby mode ().
  18. PROGRAM keys
    Select a sound program or a surround decoder ().
  19. STRAIGHT (CONNECT) key
    Enables/disables the straight decode mode ().
    Enters MusicCast CONTROLLER registration by holding down for 5 seconds ().
  20. VIDEO AUX (HDMI IN) jack
    For connecting a device, such as a camcorder and a game console ().
  21. USB jack
    For connecting a USB storage device ().
  22. VOLUME knob
    Adjusts the volume.