CONFIGURATIONS
c5_sf7.html
5
pages/c5_sf6_ss10.html
pages/c6_sf1.html
RcButton-ENTER
RcGroup-Cursor_keys
RcGroup-Cursor_x5F_keys
CONFIGURATIONS
Updating the unit’s
firmware via the network
2
Updating the firmware
(UPDATE)
System
Updating the unit’s
firmware via the network
New firmware that provides additional features or product
improvements will be released as needed. If the unit is connected
to the Internet, you can download the firmware via the network and
update it.
Note
- Do not operate the unit or disconnect
the power cable or network cable during firmware update. Firmware
update takes about 20 minutes or more (depending on your Internet
connection speed).
- If the unit is connected to the wireless network,
network update may not be possible depending on the condition of
the wireless connection. In this case, update the firmware using
the USB memory device ().
- For details on update, visit the Yamaha website.
You can also update the firmware using the USB memory device
from the “ADVANCED SETUP” menu (
).
A firmware update is available if the following message is
displayed after ON SCREEN is pressed.
- Read the on-screen description.
- To start the firmware update, use the Cursor keys
to select “START” and press ENTER.
The on-screen display turns off.
- If “Update Success Please Power Off!” appears on the front display, press MAIN ZONE z on
the front panel.
The firmware update is complete.
If you want to update the firmware later, select “CLOSE”
in Step 2.
(mail
icon) appears at the upper right of the “Information” and “System”
icons, and a message will be displayed in the “System” screen
(
). You can update the
unit’s firmware by pressing ENTER in the “System” screen.
