PREPARATIONS
c3_sf3.html
3
pages/c3_sf3.html
pages/c3_sf3_ss2.html
PREPARATIONS
Connecting the power amplifier
and subwoofers
Connecting
a power amplifier
1
About
the XLR jacks
2Connecting the power amplifier
and subwoofers
Connecting
a power amplifier
Connect
the input jacks of your power amplifier to the PRE OUT jacks of
the unit so that the audio source selected on the unit can be output
to the power amplifier for playback.Select a balanced (XLR) or an
unbalanced (RCA) connection for each channel depending on the input
jacks available on your power amplifier.
The
XLR jacks and RCA jacks for each channel output the same signals.
Caution
To
prevent the generation of loud noises or abnormal sounds, make sure
you remove the power cable of the unit and turn off the power amplifier
before making connections.
- Balanced
connection
- Unbalanced
connection
Balanced
connection
Depending
on the speaker system you want to use, connect the corresponding
PRE OUT (XLR) jacks of the unit to the amplifier with XLR balanced
cables.
- Before
connecting XLR balanced cables, refer to the instruction manual
of your power amplifier and verify that its XLR jacks are compatible
with the pin assignments of the unit ().
- We
recommend using a power amplifier with volume control bypass (or
without volume control circuit).
Unbalanced
connection
Depending
on the speaker system you want to use, connect the corresponding
PRE OUT (RCA) jacks of the unit to the amplifier with audio pin
cables (RCA unbalanced cables).
We
recommend using a power amplifier with volume control bypass (or
without volume control circuit).
