PREPARATIONS

PREPARATIONS c3_sf3.html 3 pages/c3_sf3_ss1.html pages/c3_sf4.html PREPARATIONS Connecting the power amplifier and subwoofers Connecting subwoofers 2 Subwoofer XLR jacks

2Connecting the power amplifier and subwoofers

Connecting subwoofers

Connect the subwoofers (with built-in amplifier) to the PRE OUT jacks of the unit.Select a balanced (XLR) or an unbalanced (RCA) connection depending on the input jacks available on your subwoofer.

The XLR jacks and RCA jacks output the same signals.
You can also connect up to 2 subwoofers (with built-in amplifier) to the unit. When using 2 subwoofers, configure the “Layout (Subwoofer)” setting () in the “Setup” menu after connecting the power cable to an AC wall outlet.

Caution

To prevent the generation of loud noises or abnormal sounds, make sure you remove the power cable of the unit and turn off the subwoofer before making connections.

Balanced connection
Unbalanced connection

Balanced connection

Connect the subwoofers (with built-in amplifier) to the SUBWOOFER PREOUT (XLR) 1-2 jacks of the unit with XLR balanced cables.

Before connecting XLR balanced cables, refer to the instruction manual of your subwoofer and verify that its XLR jacks are compatible with the pin assignments of the unit ().

Unbalanced connection

Connect the subwoofers (with built-in amplifier) to the SUBWOOFER PREOUT (RCA) 1-2 jacks of the unit with audio pin cables (RCA unbalanced cables).