There
are several methods to connect the unit to a wireless network.
Sharing
the iOS device setting
You
can easily set up a wireless connection by applying the connection settings
on iOS devices (iPhone/iPad/iPod touch).
Before
proceeding, confirm that your iOS device is connected to a wireless
router.
If you
set up a wireless connection with this method, the following settings
will be initialized.
- Network
settings
- Bluetooth
settings
- USB
and network items registered as shortcuts
- Internet
radio stations register to “Favorites”
- Account
information for the network services
- You
need iOS device with iOS 7 or later. (The following procedure is
a setup example for iOS 8.)
- This
configuration does not work if the security method of your wireless
router (access point) is WEP. In this case, use other connection
method.
- Press z (receiver power)
to turn on the unit.
- Turn
on the TV and switch the TV input to display video from the unit
(HDMI OUT jack).
Operations
with TV screen are available only when your TV is connected to the unit
via HDMI.
- Press SETUP.
- Use
the cursor keys to select “Network”.
- Use
the cursor keys to select “Network Connection” and press ENTER.
- Use
the cursor keys and ENTER to check “Wireless (Wi-Fi)” and select “OK”.
The
checkmark indicates the current setting.
- Use
the cursor keys and ENTER to check “Share Wi-Fi Settings (iOS)” and select “NEXT”.
- After
checking the on-screen message, use the cursor keys and ENTER to
select “NEXT”.
- On
the iOS device, select the unit as the AirPlay speaker in the Wi-Fi
screen.
- Check
the network currently selected and tap “Next”.
When
the sharing process finishes, the unit is automatically connected
to the selected network (access point).
Using
the WPS push button configuration
You
can easily set up a wireless connection with one push of the WPS button.
This
configuration does not work if the security method of your wireless
router (access point) is WEP. In this case, use other connection
method.
- Press z (receiver power)
to turn on the unit.
- Hold
down INFO (WPS) on the front panel for 3 seconds.
“Press WPS button on Access Point”
appears on the front display.
- Push
the WPS button on the wireless router (access point).
When
the connection process finishes, “Completed” appears on the front
display.
If “Not connected”
appears, repeat from Step 1 or try another connection method.
About
WPS
WPS
(Wi-Fi Protected Setup) is a standard established by the Wi-Fi Alliance, which
allows easy establishment of a wireless home network.
Using
other connection methods
If
your wireless router (access point) does not support WPS push button configuration
method, follow the procedure below to configure the wireless network
settings.
- Press z (receiver power)
to turn on the unit.
- Turn
on the TV and switch the TV input to display video from the unit
(HDMI OUT jack).
Operations
with TV screen are available only when your TV is connected to the unit
via HDMI.
- Press SETUP.
- Use
the cursor keys to select “Network” and press ENTER.
- Use
the cursor keys to select “Network Connection” and press ENTER.
- Use
the cursor keys and ENTER to check “Wireless (Wi-Fi)” and select “OK”.
The
checkmark indicates the current setting.
- Use
the cursor keys and ENTER to select the desired connection method
and select “NEXT”.
The
following connection methods are available.
|
WPS Button
|
You
can set up a wireless connection with the WPS button while viewing
the TV screen. Follow the instructions displayed on the TV screen.
|
|
Share Wi-Fi Settings (iOS)
|
|
|
Access Point Scan
|
|
|
Manual Setting
|
You
can set up a wireless connection by entering the required information
(such as SSID) manually.
|
|
PIN Code
|
You
can set up a wireless connection by entering the unit’s PIN code
into the wireless router (access point). The method is available
if the wireless router (access point) supports the WPS PIN code
method. For details on settings, see "Using
the PIN code".
|
Searching
for an access point
If
you select “Access Point Scan” as the connection method, the unit starts
searching for access points. After a while, the list of available
access points appears on the TV screen.
- Use
the cursor keys and ENTER to check the desired access point
and select “NEXT”.
The
wireless connection setting screen appears on the TV.
- Use
the cursor keys and ENTER to enter the security key and select
“NEXT”.
- Use
the cursor keys to select “CONNECT” and press ENTER to start
the connection process.
When
the connection process finishes, “Completed” appears on the TV
screen.
If “Not connected”
appears, repeat from Step 1 or try another connection method.
- To
exit from the menu, press SETUP.
Setting
up the wireless connection manually
If
you select “Manual Setting” as the connection method, the wireless connection
setting screen appears on the TV.
You
need to setup the SSID (network name), encryption method and security
key for your network.
- Use
the cursor keys and ENTER to enter the SSID of the access point
and select “NEXT”.
- Use
the cursor keys and ENTER to check the security method of the
access point and select “NEXT”.
Settings
None,
WEP, WPA2-PSK (AES), Mixed Mode
- Use
the cursor keys and ENTER to enter the security key and select
“NEXT”.
If you
select “None” in Step 2, this setting is not available. Proceed
to Step 4.
If you
select “WEP”, enter either 5 or 13 character string, or 10
or 26 hexadecimal digits.
If you
select other method, enter either 8 to 63 character string, or 64
hexadecimal digits.
- Use
the cursor keys to select “CONNECT” and press ENTER to start
the connection process.
When
the connection process finishes, “Completed” appears on the TV
screen.
If “Not connected”
appears, check that all the information is entered correctly, and
repeat from Step 1.
- To
exit from the menu, press SETUP.
Using
the PIN code
If
you select “PIN Code” as the connection method, the list of available
access points appears on the TV screen.
- Use
the cursor keys and ENTER to check the desired access point
and select “NEXT”.
The
PIN code of the unit appears on the TV screen.
- Enter
the unit’s PIN code into the wireless router (access point).
For
details on settings, refer to the instruction manual of the wireless
router (access point).
- Use
the cursor keys to select “CONNECT” and press ENTER to start
the connection process.
When
the connection process finishes, “Completed” appears on the TV
screen.
If “Not connected”
appears, repeat from Step 1 or try another connection method.
- To
exit from the menu, press SETUP.
The checkmark indicates the current setting.
