Information on HDMI

HDMI Control

Operations available from the TV’s remote control

• Standby
  
• Volume control including mute
  
• Switching to input audio from the TV when the TV input is switched to its built-in tuner
  
• Switching to input video/audio from the selected playback device
  
• Switching between audio output devices (the unit or TV speaker)
  

(Example)

Operations available from the unit’s remote control

• Starting playback on the playback device and turning on the TV with a scene selection
  
• Switching the TV input to display the “Setup” menu (when SETUP is pressed)
  
• Controlling the external device from which video is displayed on the TV (playback and menu operations)
  
• Controlling the TV when you select TV audio input that is set in “TV Audio Input” in the “Setup” menu
  
• Controlling the TV with the color (RED/GREEN/YELLOW/BLUE) keys of the remote control when “TV Control” is set for the color keys
  

(Example)

HDMI Control might not work properly. For related functions and settings, refer to the following.

• For linking with the selected scene, see "Selecting the input source and favorite settings with one touch (SCENE)".
  
• For setting the jack for TV audio input, see "TV Audio Input".
  
• For setting the functions of the color keys, see "Color Key".
  

To use HDMI Control, you need to perform the following HDMI Control link setup after connecting the TV and playback devices.

For details on settings and operating your TV, refer to the instruction manual for the TV.

1. Turn on the unit, TV, and playback devices.
   
2. Configure the settings of the unit.
   
   1. Switch the TV input to display video from the unit.
      
   2. Press SETUP.
      
      
   3. Use the cursor keys to select “Video/HDMI”.
      
      
   4. Use the cursor keys to select “HDMI Control” and press ENTER.
      
   5. Use the cursor keys to select “On”.
      
   6. Press SETUP.
      
3. Enable HDMI Control on the TV and playback devices (such as HDMI Control-compatible BD/DVD players).
   
4. Turn off the main power of the TV and then turn off the unit and playback devices.
   
5. Turn on the unit and playback devices and then turn on the TV.
   
6. Switch the TV input to display the video from the unit.
   
7. Check the followings.
   On the unit: The input to which the playback device is connected is selected. If not, select the input source manually.
   On the TV: The video from the playback device is displayed.
   
8. Check that the unit is properly synchronized with the TV by turning off the TV or adjusting the TV volume with the TV remote control.