TA3GRADE_VISUAL TA3GRADE_VISUAL

各部の名称

  • コントローラー

    タップセンサー

    各部の名称
  • リングLED

    PowerLED

    コントローラー

Line Out

  • output_jack

    Output ジャック

  • line_out_ボリューム

    Line Out ボリューム

電源を接続する(本体を充電する)

本製品の機能を使用するには、あらかじめ内蔵充電池へ充電が必要です。

  • USB電源アダプターにアタッチメントプラグを付けます。
    電源アダプターにアタッチメントプラグを付けます 電源アダプターにアタッチメントプラグを付けます
    矢印の方向にスライドさせて
    取り付けます。
    アタッチメントプラグ(7種)
    使用エリアの電源コンセントの形状に合わせて選択してください。
  • 本体に専用電源ケーブルを接続し、USB電源アダプターをコンセントに接続します。
    本体に専用電源ケーブルを接続 本体に専用電源ケーブルを接続
  • 電源ケーブルをつなぐと、リングLEDが赤色でバッテリー残量を表示します。

電源をOnにする/Offにする

電源をOnにする

  • Power ボタンを長押しします。
  • 電源がOnになります。
    PowerLEDが点灯し、リングLEDが緑色でバッテリー残量を表示します。

電源をOffにする

  • Powerボタンを
    長押しする。
  • 電源が切れます。
    PowerLEDが消えます。

バッテリー残量の確認

Powerボタンを押すとリングLEDが、電源ケーブルが接続されているときは赤色、されていない時は緑色で、バッテリー残量を表示します。

オートパワーセーバーのOn/Off切り替え

本機には、30分間無音状態が続いた場合に、省電力のため自動で電源を切る機能が搭載されています。工場出荷時は、この機能はOnになっています。機能のOn/Offは、ReverbボタンとChorusボタンを同時に押すことで切り替えられます。

  • Auto power on
  • Auto power off

ルーパー(Looper)を使って演奏する

基本的な使い方

ルーパーに伴奏などの演奏(ループフレーズ)を録音してループ再生し、それに重ねて演奏を楽しめる機能です。

  • Loopボタンを押します。
  • ルーパーが立ち上がり、LoopボタンのLEDが点灯します。
  • Reverbボタンを押します。
  • 録音待機状態になります。録音待機中はLEDが赤く点滅します。
  • 演奏を開始、
    またはもう一度Reverbボタンを押します。
    1. 演奏を開始
    2. または
  • 録音が開始されます。
    録音中はLEDが赤く点灯します。
  • タップセンサーをタップ、またはReverbボタンを押します。
    1. または
  • 録音が終了し、ルーパーから録音されたループフレーズが再生されます。
    ループフレーズ再生中はリングLEDが緑色に回転します。
  • Loopボタンを回して再生の音量を調節します。
  • 再生されたループフレーズと合わせて演奏します。
  • Chorusボタンを押す。
  • ループフレーズの再生が止まります。
    再生を再開するにはReverbボタンを押します。

録音データの消去

再生が停止した状態でChorusボタンを長押しすると、ループフレーズを消去できます。

    • ループフレーズ有
      ループフレーズ有
    • 消去後
      消去後

録音データがあるときはリングLEDの上部が緑に点灯します。
再度Chorusボタンを長押しすると、消去したループフレーズが復元されます。

Overdub

あらかじめ録音したループフレーズに新しい演奏を重ねて多重録音(Overdub)する使い方です。

  • 再生が止まっている状態からReverbボタンを押します。
  • 録音したループフレーズの再生が始まります。
    ループフレーズ再生中はリングLEDが緑色に回転します。
  • もう一度Reverbボタンを押します。
  • Overdub録音が始まります。
    Overdub録音中はリングLEDが赤色に回転します。
  • 再生されたループフレーズに合わせて演奏します。
    • 再生されたループフレーズに合わせて演奏します
    • 新しい演奏が、もとのループフレーズにOverdub録音されます
  • 新しい演奏が、もとのループフレーズにOverdub録音されます。
  • Reverbボタンを押します。
  • Overdub録音が終了し、Overdubされたループフレーズが再生されます。
    ループフレーズ再生中はリングLEDが緑色に回転します。

Undo/Redo

ループフレーズがある状態でReverbボタンを長押しすると、直前の録音を取り消し(Undo)できます。再度Reverbボタンを長押しすると取り消した録音が再び復元(Redo)されます。

    • Undo
    • Redo
  • Chorusボタンを押します。
  • ループフレーズの再生が止まります。 再生を再開するにはReverbボタンを押します。

トランスアコースティックエフェクト(TA)をかけて演奏する

トランスアコースティックエフェクト(TA)をかけて演奏する

リバーブ(Reverb)

  • Reverbボタンを回して、リバーブ効果を調節します。右に回すとリバーブ音量が大きくなり(Wet)、左に回し切るとリバーブなし(Dry)になります。
  • Reverbボタンを回して、リバーブ効果を調節します

コーラス(Chorus)

  • Chorusボタンを回して、コーラス効果を調節します。 右に回すとコーラス音量が大きくなり(Wet)、左に回し切るとコーラスなし(Dry)になります。
  • Chorusボタンを回して、コーラス効果を調節します

ディレイ(Delay)+タップテンポ

  • Delayボタンを回して、ディレイ効果を調節します。 右に回すとディレイ音量が大きくなり(Wet)、左に回し切るとディレイなし(Dry)になります。 ディレイタイムはDelayボタンを任意の速さでタップすることで設定できます。
  • Delayボタンを回して、ディレイ効果を調節します

Bluetooth機器を接続する

スマートデバイスなどとBluetooth接続することで、本機をスピーカー代わりにして音楽を再生できます。

Bluetoothペアリング

  • Loopボタンを長押します。
  • ペアリングモードに入ります。 ペアリングモード中はリングLEDがゆっくりと点滅します。
  • スマートデバイスから本機を選択します。 TAG3C XXXXXXと表示されたら、タップします。
  • スマートデバイスから本機を選択します
  • ペアリングが完了すると、リングLEDが3回点滅したのちPowerLEDが青く点灯します。
  • スマートデバイスでお好きな音楽を選び再生します。
  • スマートデバイスでお好きな音楽を選び再生します
    • スマートデバイスでお好きな音楽を選び再生します
  • 本機から再生されます。

Bluetooth接続を切る

  1. Loopボタンを長押しします。
  2. ペアリングが切断されます。

Line Outで外部機器と接続して演奏する

ギターのOutputジャックからシールド・ケーブルを通じて出力し、外部のアンプなどに接続するエレクトリック・アコースティックギターとしての使用法です。Line Outへはギター音に加え、エフェクト音、再生されたループフレーズが出力されます。Bluetoothオーディオは出力されません。

  • 本機にシールド・ケーブルを挿します。
  • 本機にシールド・ケーブルを挿します。
  • 電源Off時にシールド・ケーブルを挿すと、自動で電源が入ります。
    緑に点灯
    TAエフェクト
    Offの時
    白に点灯
    TAエフェクト
    Onの時
  • Line Outボリュームで出力音量を調節します。
  • Line Outボリュームで出力音量を調節

Tunerを使う

このギターにはチューナーが内蔵されています。入力された音に最も近いピッチを基準に、正しいピッチとの差分をリングLEDの色と動きで表示するタイプのクロマチック・チューナーです。リングの左側が赤く点灯するとピッチが低く、右側が赤く点灯するとピッチが高いことを表します。ピッチが合うと真ん中上部だけが緑に点灯します。

  • Delayボタンを長押しします。
  • チューナーが立ち上がります。

ギターをチューニングしてピッチを合わせます

リングLED真ん中上部の緑だけ点灯するように、合わせます。

  • Flat

  • In tune

  • Sharp

  • Delayボタンを長押しします。
  • チューナーから抜けます。

TAG Remote Appを使う

アプリをインストールする。

  • iPhone、iPad、またはAndroid OSスマートデバイスにTAG Remote appをインストールします。
  • App Storeからダウンロード Google Play で手に入れよう

TAG Remote appに接続する

  • Bluetooth icon
    Bluetoothアイコンをタップします。

  • TAG Remote appに接続する TAG Remote appに接続する
  • Bluetooth icon
    Bluetoothアイコンをタップします。

  • Bluetoothアイコンをタップします Bluetoothアイコンをタップします
  • EDITOR TAG3C XXXXXXと表示されたらタップします。

  • EDITOR TAG3C XXXXXXと表示されたらタップします。

  • Connectedと表示されたら接続完了です。

  • XXXXXXと表示されたらタップします XXXXXXと表示されたらタップします
  • Connectedと表示されたら接続完了です。

ルーパーの設定を変える

  • ルーパー設定画面
  • Direct Overdub Mode
    ループフレーズ録音後、タップセンサーをタップした時の動作を切り替えます。Offの場合は再生、OnにするとOverdubが始まります。

    Tap Enable
    Offにすることでタップセンサー機能を無効にできます。

    Looper Tap Overdub
    OnにするとOverdub時にタップセンサーをReverbボタンの代わりに使えます。

    Current Looper Track + ループフレーズを10個のLooper Trackに保存できます。

    Alternative Color Indication
    Onにすると、ルーパー使用時のLEDの赤色を青色に変更できます。見やすい方をご使用ください。

エフェクトのパラメーターを変える

コーラス(Chorus)

[DOUBLE DETUNE]と[4 VOICE]の2種類のコーラスタイプが選べます。

DOUBLE DETUNE

  • DOUBLE DETUNE設定画面
  • Cents Down
    左に回すと原音のピッチが下がります。

    Cents Up
    右に回すと原音のピッチが上がります。

    Tone
    エフェクト音の音質を調節します。

4 VOICE

  • 4voice設定画面
  • Depth
    コーラス効果の深さを調節します。 右に回すと効果が深くなり、左に回すと浅くなります。

    Tone
    エフェクト音の音質を調節します。

    Num Voices
    波形の重なり(レイヤー)数を調節します。右に回すとレイヤーが増え、右に回し切ると4レイヤー。左に回し切ると1レイヤーになります。

    Speed
    コーラス効果のスピードを調節します。 右に回すとスピードが速くなり、左に回すと遅くなります。

ディレイ(Delay)

[SIMPLE]と[ANALOG]の2種類のディレイタイプが選べます。

SIMPLE

  • シンプル設定画面
  • Time
    ディレイタイムを調節します。右に回すとディレイタイムが長くなります。

    Feedback
    フィードバック量を調節します。右に回すとディレイ音の繰り返し回数が多くなります。 左に回し切ると、シングルディレイになります。

    Low Damping
    ディレイ音の音質を調節します。右に回すと低域がカットされます。

    High Damping
    ディレイ音の音質を調節します。右に回すと高域がカットされます。

ANALOG

  • アナログ設定画面
  • Time
    ディレイタイムを調節します。右に回すとディレイタイムが長くなります。

    Feedback
    フィードバック量を調節します。右に回すとディレイ音の繰り返し回数が多くなります。左に回し切ると、シングルディレイになります。

    Bass
    ディレイ音の音質を調節します。右に回すと低域が強調されます。

    Treble
    ディレイ音の音質を調節します。右に回すと高域が強調されます。

リバーブ(Reverb)

[HALL]/[ROOM]/[PLATE]、3つのリバーブタイプが選べます。

  • リバーブ設定画面
  • Decay
    リバーブ音の長さを調節します。右に回すと長くなり、左に回すと短くなります。

    Tone
    リバーブ音の音質を調節します。右に回すと高域が強調され、左に回すと高域がカットされます。

    Predelay
    原音に対し、リバーブ音が鳴り始めるタイミングを調節します。右に回すと遅れて発音し、左に回し切ると原音と同時に発音します。

その他の機能と設定

  • その他の機能と設定画面 その他の機能と設定画面
  • About/Licenses
    タップするとFirmwareのバージョンが確認できます。

    Battery Level
    現在のバッテリー残量がインジケーターに表示されます。

    Auto Power Saver
    オートパワーセーブ機能のOn/Offを切り替えます。Offにすると、自動で電源が切れなくなります。

    Guitar Input Gain
    エフェクターに入力されるギター音の量を調節します。フィードバック(ハウリング)が起きた場合に、この値を下げることで解決できることがあります。

    Tuner Reference Frequency
    438 Hz~445 Hzの間で、チューナーの基準ピッチを変更できます。

    Bluetooth Auto Connect
    以前に接続したデバイスと自動で再接続する機能のOn/Offを切り替えます。Off にすると都度ペアリング操作が必要になります。

    Disconnect Bluetooth Audio
    タップすると、接続中のBluetooth Audio通信を切断できます。

    Firmware Update + トランスアコースティックギターのファームウェアを更新します。

      ファームウェア更新の手順
      最新のファームウェアがある場合には、TAG Remote app接続時にポップアップが表示されます。更新する場合は“Perform Update”をタップします。

    • update avaliable
    • 注意事項を読み、問題なければ“Proceed”をタップします。 before you begin
    • 更新が始まります。 update
    • 更新が完了すると、ポップアップが表示されます。 update succeeded
    • ギター本体のリングLEDが青色に9回点滅したあと、自動で電源が切れます。

    Factory Reset Instructions
    タップすると、すべてのセッティングを工場出荷時の状態に戻す手順が表示されます。

仕様一覧

システム SYSTEM 76
ピックアップ バーセンサー(ピエゾタイプ)
コントロール
  • リバーブエフェクト
  • コーラスエフェクト
  • ディレイエフェクト
  • ルーパーエフェクト
ディスプレイ 電源LED / リングLED / ルーパーLED
出力ジャック エンドピン/ラインアウト電源スイッチ兼用
出力インピーダンス 165Ω
電源 USB電源アダプターまたは内蔵充電池で駆動
USB電源アダプター
  • UNXBU3012-050020SA
  • Input:100 VAC~240 VAC
  • Output:5.1 VDC/2A (USB-A)
内蔵充電池
  • リチウムイオン電池
  • 充電時間(フル充電):約4時間30分
  • 充電温度:+5°C~+40°C
  • 製品動作温度範囲:+5°C~+40°C
  • 連続駆動時間:最大 約5時間30分*使用状況により異なる
消費電力 9.5 W
待機消費電力 0.5 W
付属品
  • USB電源アダプター×1
  • アタッチメントプラグ×7
  • 専用電源ケーブル×1
  • ネック調整用六角レンチ
  • 専用ケース
  • クイックガイド
  • チラシ
Bluetooth
  • 無線周波数:2.402 GHz – 2.480 GHz
  • 最大出力電力(EIRP):+2 dBm
  • バージョン:5.2
  • 対応コーデック:SBC
  • 対応プロファイル:A2DP
  • 最大通信距離:10 m
  • 無線出力:Bluetooth Class 2

オープンソースコード

ZIPFoundation

MIT License

Copyright (c) 2017-2024 Thomas Zoechling (https://www.peakstep.com)

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

XCGLogger

The MIT License (MIT)

Copyright (c) 2014 Dave Wood, Cerebral Gardens https://www.cerebralgardens.com/

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

Gong

The MIT License (MIT)

Copyright (c) 2015 Daniel Clelland

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

Guava

Copyright (C) 2011 The Guava Authors

Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

Apache License Version 2.0, January 2004 http://www.apache.org/licenses/

TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION

1. Definitions.

"License" shall mean the terms and conditions for use, reproduction, and distribution as defined by Sections 1 through 9 of this document.

"Licensor" shall mean the copyright owner or entity authorized by the copyright owner that is granting the License.

"Legal Entity" shall mean the union of the acting entity and all other entities that control, are controlled by, or are under common control with that entity. For the purposes of this definition, "control" means (i) the power, direct or indirect, to cause the direction or management of such entity, whether by contract or otherwise, or (ii) ownership of fifty percent (50%) or more of the outstanding shares, or (iii) beneficial ownership of such entity.

"You" (or "Your") shall mean an individual or Legal Entity exercising permissions granted by this License.

"Source" form shall mean the preferred form for making modifications, including but not limited to software source code, documentation source, and configuration files.

"Object" form shall mean any form resulting from mechanical transformation or translation of a Source form, including but not limited to compiled object code, generated documentation, and conversions to other media types.

"Work" shall mean the work of authorship, whether in Source or Object form, made available under the License, as indicated by a copyright notice that is included in or attached to the work (an example is provided in the Appendix below).

"Derivative Works" shall mean any work, whether in Source or Object form, that is based on (or derived from) the Work and for which the editorial revisions, annotations, elaborations, or other modifications represent, as a whole, an original work of authorship. For the purposes of this License, Derivative Works shall not include works that remain separable from, or merely link (or bind by name) to the interfaces of, the Work and Derivative Works thereof.

"Contribution" shall mean any work of authorship, including the original version of the Work and any modifications or additions to that Work or Derivative Works thereof, that is intentionally submitted to Licensor for inclusion in the Work by the copyright owner or by an individual or Legal Entity authorized to submit on behalf of the copyright owner. For the purposes of this definition, "submitted" means any form of electronic, verbal, or written communication sent to the Licensor or its representatives, including but not limited to communication on electronic mailing lists, source code control systems, and issue tracking systems that are managed by, or on behalf of, the Licensor for the purpose of discussing and improving the Work, but excluding communication that is conspicuously marked or otherwise designated in writing by the copyright owner as "Not a Contribution."

"Contributor" shall mean Licensor and any individual or Legal Entity on behalf of whom a Contribution has been received by Licensor and subsequently incorporated within the Work.

2. Grant of Copyright License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable copyright license to reproduce, prepare Derivative Works of, publicly display, publicly perform, sublicense, and distribute the Work and such Derivative Works in Source or Object form.

3. Grant of Patent License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable (except as stated in this section) patent license to make, have made, use, offer to sell, sell, import, and otherwise transfer the Work, where such license applies only to those patent claims licensable by such Contributor that are necessarily infringed by their Contribution(s) alone or by combination of their Contribution(s) with the Work to which such Contribution(s) was submitted. If You institute patent litigation against any entity (including a cross-claim or counterclaim in a lawsuit) alleging that the Work or a Contribution incorporated within the Work constitutes direct or contributory patent infringement, then any patent licenses granted to You under this License for that Work shall terminate as of the date such litigation is filed.

4. Redistribution. You may reproduce and distribute copies of the Work or Derivative Works thereof in any medium, with or without modifications, and in Source or Object form, provided that You meet the following conditions:

(a) You must give any other recipients of the Work or Derivative Works a copy of this License; and

(b) You must cause any modified files to carry prominent notices stating that You changed the files; and

(c) You must retain, in the Source form of any Derivative Works that You distribute, all copyright, patent, trademark, and attribution notices from the Source form of the Work, excluding those notices that do not pertain to any part of the Derivative Works; and

(d) If the Work includes a "NOTICE" text file as part of its distribution, then any Derivative Works that You distribute must include a readable copy of the attribution notices contained within such NOTICE file, excluding those notices that do not pertain to any part of the Derivative Works, in at least one of the following places: within a NOTICE text file distributed as part of the Derivative Works; within the Source form or documentation, if provided along with the Derivative Works; or, within a display generated by the Derivative Works, if and wherever such third-party notices normally appear. The contents of the NOTICE file are for informational purposes only and do not modify the License. You may add Your own attribution notices within Derivative Works that You distribute, alongside or as an addendum to the NOTICE text from the Work, provided that such additional attribution notices cannot be construed as modifying the License.

You may add Your own copyright statement to Your modifications and may provide additional or different license terms and conditions for use, reproduction, or distribution of Your modifications, or for any such Derivative Works as a whole, provided Your use, reproduction, and distribution of the Work otherwise complies with the conditions stated in this License.

5. Submission of Contributions. Unless You explicitly state otherwise, any Contribution intentionally submitted for inclusion in the Work by You to the Licensor shall be under the terms and conditions of this License, without any additional terms or conditions. Notwithstanding the above, nothing herein shall supersede or modify the terms of any separate license agreement you may have executed with Licensor regarding such Contributions.

6. Trademarks. This License does not grant permission to use the trade names, trademarks, service marks, or product names of the Licensor, except as required for reasonable and customary use in describing the origin of the Work and reproducing the content of the NOTICE file.

7. Disclaimer of Warranty. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

8. Limitation of Liability. In no event and under no legal theory, whether in tort (including negligence), contract, or otherwise, unless required by applicable law (such as deliberate and grossly negligent acts) or agreed to in writing, shall any Contributor be liable to You for damages, including any direct, indirect, special, incidental, or consequential damages of any character arising as a result of this License or out of the use or inability to use the Work (including but not limited to damages for loss of goodwill, work stoppage, computer failure or malfunction, or any and all other commercial damages or losses), even if such Contributor has been advised of the possibility of such damages.

9. Accepting Warranty or Additional Liability. While redistributing the Work or Derivative Works thereof, You may choose to offer, and charge a fee for, acceptance of support, warranty, indemnity, or other liability obligations and/or rights consistent with this License. However, in accepting such obligations, You may act only on Your own behalf and on Your sole responsibility, not on behalf of any other Contributor, and only if You agree to indemnify, defend, and hold each Contributor harmless for any liability incurred by, or claims asserted against, such Contributor by reason of your accepting any such warranty or additional liability.

END OF TERMS AND CONDITIONS

APPENDIX: How to apply the Apache License to your work.

To apply the Apache License to your work, attach the following boilerplate notice, with the fields enclosed by brackets "[]" replaced with your own identifying information. (Don't include the brackets!) The text should be enclosed in the appropriate comment syntax for the file format. We also recommend that a file or class name and description of purpose be included on the same "printed page" as the copyright notice for easier identification within third-party archives.

Copyright [yyyy] [name of copyright owner]

Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.