HY128-MD DIP switches

Software Control

SW251 (SOFT CTRL)	Settings
ON (Enable)	For changing the settings with the control surface (default setting)
OFF (Disable)	For changing the settings with the DIP switches on the card

Input Priority

SW701 1	SW701 2	Settings
OFF	OFF	Mode 1 Prioritize the OPTICAL 1 and OPTICAL 2 signals (default setting)
OFF	ON	Mode 1 Prioritize the COAXIAL 1 and COAXIAL 2 signals
ON	OFF	Mode 2 Prioritize the OPTICAL 1 and COAXIAL 1 signals
ON	ON	Mode 2 Prioritize the OPTICAL 2 and COAXIAL 2 signals

HY128-MD Redundant Mode

Split ON/OFF

SW701 3 (MADI 1) SW701 4 (MADI 2)	Settings
OFF	Do not split input signals (default setting)
ON	Split input signals when sending them to output connectors

Input Rate

SW702 1 (MADI 1) SW702 3 (MADI 2)	SW702 2 (MADI 1) SW702 4 (MADI 2)	Settings
OFF	OFF	1Fs, 44.1 kHz/48 kHz, maximum 64 ch (default setting)
ON	OFF	2Fs, 88.2 kHz/96 kHz, maximum 32 ch
OFF	ON	4Fs, 176.4 kHz/192 kHz, maximum 16 ch
ON	ON	Not in use (1Fs)

Input SRC ON/OFF

SW703 1 (MADI 1) SW703 2 (MADI 2)	Settings
OFF	SRC off (default setting)
ON	SRC on

Input SRC Clock

SW703 3 (MADI 1) SW703 4 (MADI 2)	Settings
OFF	The clock synced to the MADI input signal (default setting)
ON	Clock input from the [WCLK IN FOR SRC] connector

Output SRC ON/OFF

SW704 1 (MADI 1) SW704 2 (MADI 2)	Settings
OFF	SRC off (default setting)
ON	SRC on

Output SRC Clock

SW704 3 (MADI 1) SW704 4 (MADI 2)	Settings
OFF	The clock synced to the MADI input signal (default setting)
ON	Clock input from the [WCLK IN FOR SRC] connector