10. SETTINGS screen

Here you can make various settings for STAGEPAS Editor.

settings n

Knob Operation
Specifies how the knobs of STAGEPAS Editor will operate.
Rotary: :Edit the value by dragging in a circle around the shape of the knob. Clockwise increases the value, and counterclockwise decreases the value.
Linear: Drag upward or right to increase the value, or downward or left to decrease the value.

Default value: Rotary

Count Leader
Specifies the time until playback actually starts after you tap the Play button of MUSIC PLAYER.
Use the slider to adjust the setting in one-second steps for a range of 0–10 seconds.
If you specified Count Leader, a circle that makes one rotation in the specified time appears around the Play button when you tap the Play button.
If you tap the PLAY button again during the count, playback will be canceled.

count leader

Default value: 0 seconds

Double Tap Operation
Turns double tap operation on/off. If this is on, you can reset a parameter of the EFFECT/EQ/PAN screen to its default value by double-tapping it.

Default: ON

Cued Mode
Specifies the playback mode.
If this is on, playback pauses at the beginning of the next song when a song finishes playing.
If this is off, the next song plays back after a song finishes playing.

Default value: OFF

Recall Confirmation
Specifies whether a confirmation message is displayed when recalling.

Default: ON

Device Setting button
Tap this to access the Device Setting screen.

User Guide button
Displays the STAGEPAS Editor user guide (this document).

About
Displays the About screen.

10.1. Device Setting screen

device setting

Device Name
Specifies the device name of the STAGEPAS 1K.

Passcode
Specifies a passcode for security.

10.2. Specifying the Device Name

The device name is shown in the Device List screen and also in the Bluetooth pairing screen of your mobile device.

  1. In the toolbar, tap settings icon to access the SETTINGS screen.

settings
  1. Tap the Device Setting button to access the Device Setting screen.

Device Setting
  1. Tap the Device Name entry field, and enter the Device Name.

setting device name
  1. Press the Done button to confirm.

note NOTE

  • Although you can specify this as blank, it is shown as "STAGEPAS 1K" if specified as blank.

10.3. Specifying a passcode

note NOTE

  • Online connection is not possible if you don’t specify a passcode.

  • If you forget the passcode that you specified, initialize the STAGEPAS 1K. Take care not to forget the passcode.

  1. In the toolbar, tap settings icon to access the SETTINGS screen.

settings
  1. Tap the Device Settings button to access the Device Settings screen.

Device Setting
  1. Tap the passcode field, enter a four-digit number of your choice and tap the Done button to confirm.

setup passcord

The passcode is sent to the STAGEPAS 1K, and you return to the Device Setting screen.
If you tap the Cancel button, you return to the SETTIINGS screen.