Speaker systems and speakers to be connected
Select the speaker layout for the number of speakers that you are using and place the speakers and subwoofer in your room.
Speaker type | Speaker system | ||
|---|---|---|---|
7.1/5.1.2 | 5.1 | 2.1 | |
Front (L/R) 1/2 | |||
Center 3 | |||
Surround (L/R) 4/5 | *3 | ||
Surround back (L/R) 6/7 | *1 | ||
Presence (L/R) E/R | *2 | *4 | |
Subwoofer 9 | |||
If you have nine speakers, you can use the both surround back speakers and presence speakers. In this case, the unit automatically changes the speakers to be used, depending on the input signal and CINEMA DSP.
If you have seven speakers, use two of them as surround back speakers (*1) or presence speakers (*2).
If you have five speakers, use two of them as surround speakers (*3) or presence speakers (*4).
NOTE
- “5.1.2-channel” denotes “standard 5.1-channel plus 2 for overhead speaker channels”.
- When using surround back speakers, be sure to connect the surround back left and right speakers. Using only one surround back speaker was discontinued.
- You can also connect up to 2 subwoofers (with built-in amplifier) to the unit.