Setting the use of the Network Standby function
Selects whether the unit can be turned on from other network devices (network standby).
Setup menu
“Network” > “Network Standby”
Settings
Off | Disables the network standby function. |
On | Enables the network standby function. (The unit consumes more power than when “Off” is selected.) |
Auto | Enables the network standby function. (If “Network Connection” is set to “Wired”, the unit is set to the power saving mode when the network cable is disconnected.) |
NOTE
- If you set “Network Standby” to “Off”, “Bluetooth Standby” will be disabled.
With an advanced energy saving design, this product achieves a low power consumption of not more than two watts when in Network Standby mode.
Related links
- Checking the network information on the unit
- Setting the network connection method (Wired/Wireless)
- Setting the network parameters automatically (DHCP)
- Setting the network parameters manually
- Setting the MAC address filter
- Setting the MAC address
- Setting the use of a Digital Media Controller
- Setting the use of volume control via AirPlay
- Setting the network name of the unit
- Setting the power interlock from the unit to MusicCast compatible devices