Setting up a wireless connection manually

You can set up a wireless connection by entering the required information manually. You need to set up the SSID (network name), encryption method and security key for your network.

Setup menu

“Network” > “Network Connection” > “Wireless(Wi-Fi)”

  1. Use the cursor keys to select “Manual Setting” and press ENTER.
  1. Use the cursor keys to select “NEXT” and press ENTER.
  • The edit screen appears.
  1. Use the cursor keys and ENTER to enter the SSID of the access point.
  1. When finished entering the key, use the cursor keys to select “NEXT” and press ENTER.
  1. Use the cursor keys to select the encryption method.
  • Choices
  • None, WEP, WPA-PSK(AES), Mixed Mode
NOTE
If you select “None”, the connection may be insecure since the communication is not encrypted.
  1. Use the cursor keys to select “NEXT” and press ENTER.
  • The edit screen appears.
NOTE
  • If you select “None” in step 5, this item is not available.
  1. Use the cursor keys and ENTER to enter the security key.
  1. When finished entering the key, use the cursor keys to select “NEXT” and press ENTER.
  • The manual setting screen appears on the TV.
  1. Use the cursor keys to select “CONNECT” and press ENTER to start the connection process.
  • When the connection process finishes, “Completed” appears on the TV screen.
  • If “Not connected” appears, check that all the information is entered correctly, and repeat from step 1.
  1. Press SETUP.
  • This completes the network settings.

Related links