Enjoying audio using Bluetooth® speakers/headphones

You can enjoy audio played back on the unit using Bluetooth speakers/headphones.

NOTE
  • Sounds will be also output from the speakers connected to the unit.
  • AirPlay and DSD audio cannot be delivered.
  • You cannot use the Bluetooth audio transmitter function and the Bluetooth audio receiver function at the same time.
  1. Use the input selection keys on the remote control to select an input source.
  • Select an input source other than Bluetooth.
  1. Press SETUP.
  1. Use the cursor keys to select “Bluetooth” and press ENTER.
  1. Use the cursor keys to select “Audio Send” and press ENTER.
  1. Use the cursor keys to select “Transmitter” and press ENTER.
  1. Use the cursor keys to select “On” and press RETURN.
  1. Use the cursor keys to select “Device Search” and press ENTER to search the Bluetooth devices.
  • The list of Bluetooth devices is displayed.
  1. Use the cursor keys to display the desired Bluetooth speakers/headphones and press ENTER.
  1. Use the cursor keys and ENTER to check the Bluetooth speakers/headphones to be connected with the unit.
  1. Use the cursor keys to select “CONNECT” and press ENTER.
  • When the connection process finishes, “Completed” is displayed and audio played back on the unit will be reproduced from the Bluetooth speakers/headphones.
NOTE
  • If the desired Bluetooth device is not displayed on the list, set the Bluetooth device to the pairing mode and then perform “Device Search” operation again.
  1. Press SETUP.
  • This completes the settings.
NOTE
  • When the Pure Direct is enabled, input sources other than the network sources and USB cannot be delivered.
  • To terminate the Bluetooth connection, perform one of the following operations.
  • Perform the disconnect operation on the Bluetooth speakers/headphones.
  • Press the SETUP key, then use the cursor keys to select "Bluetooth", then "Transmitter", and then "Off".
Related links