Registering a scene

You can change the default setting and register the function that is assigned to each SCENE key.

NOTE
  • We recommend registering the scene with playing back the content that you want to register.
  • To control Zone2, set MAIN/ZONE 2 to “ZONE 2”.
  1. Perform the following operations to prepare the settings you want to assign to a scene.
  • Select an input source
  • Select a sound program or straight decode
  • Enable/disable Compressed Music Enhancer
  • Enable/disable SCENE link playback
  1. Hold down the desired SCENE key on the remote control until “SET Complete” appears on the front display.
  • This completes the registers.