Setting the Zone2 initial volume when the Zone2 output is enabled
Sets the Zone2 initial volume when the Zone2 output is enabled.
Setup menu
“Sound” > “Volume” > “Zone2 Initial Volume”
Settings
Off | Sets the level to the volume level of the unit when it last entered standby mode. |
Mute | Sets the unit to mute the audio output. |
-80.0 dB to +16.5 dB (0.5 dB increments) [0.5 to 97.0 | Sets the level to the specified volume level. |
NOTE
- This setting is available only when “Power Amp Assign” is set to “Zone 2”. For details on “Power Amp Assign” in the “Setup” menu, see the following:
- This setting works only when the volume level is set lower than “Zone2 Max Volume”. For details on “Zone2 Max Volume” in the “Setup” menu, see the following:
Related links
- Setting the broadening effect of the front sound field
- Adjusting the broadening effect of the center sound field
- Adjusting the difference in level between the front and surround sound fields
- Adjusting the center localization (broadening effect) of the front sound field
- Setting the use of Monaural Mix
- Setting the adjustment method of the Lipsync function
- Adjusting the delay of the Lipsync function
- Adjusting the volume of dialogue sound
- Setting the scale of the volume display
- Setting the dynamic range adjustment method
- Setting the Main zone limit value of the volume
- Setting the Main zone initial volume when the unit is turned on
- Setting the Zone2 limit value of the volume