Registering a scene

You can change the default setting and register the function that is assigned to each numbered key (1 to 8).

NOTE
  • We recommend registering the scene with playing back the content that you want to register.
  • To control Zone2, set MAIN/ZONE 2 to “ZONE 2”.
  1. Perform the following operations to prepare the settings you want to assign to a scene.
  • Select an input source
  • Select the assigned radio station or content (when “NET”, “USB”, “Bluetooth” or “TUNER” is selected for the input source only)
  • Select a sound Program, straight decode or Pure Direct
  • Enable/disable Compressed Music Enhancer
  • Select an HDMI output jack
  1. Hold down the desired numbered key (1 to 8) until “SET Complete” appears on the front display or on the TV.
  • This completes the registers.
NOTE
  • For details on the settings, see the following:
  • You can configure more detailed scene assignments in “Scene” in the “Setup” menu. For details, see the following:
  • You can change the SCENE name displayed on the front display or on the TV. For details, see the following: