Switching information on the front display

Press INFO on the front panel to select between the various display items on the front display, as shown in the following table.

About 3 seconds after a display item is selected, its corresponding information appears.

Currently input source

Displayed item

HDMI

AV

AUX

AUDIO

PHONO

Input (input source name), DSP Program (sound mode name), Audio Decoder (decoder name*)

TUNER

Frequency (frequency), DSP Program (sound mode name), Audio Decoder (decoder name*)

(U.K., Europe, Russia and Middle East models only)
Radio Data System data is also available when the unit is tuned into a Radio Data System broadcasting station. For details, see the following:

Bluetooth

USB

Song (song title), Artist (artist name), Album (album name), DSP Program (sound mode name), Audio Decoder (decoder name*)

SERVER

AirPlay

Song (song title), Artist (artist name), Album (album name), DSP Program (sound mode name), Audio Decoder (decoder name*), IP Address, Ethernet MAC, Wi-Fi MAC

NET RADIO

Song (song title), Album (album name), Station (station name), DSP Program (sound mode name), Audio Decoder (decoder name*), IP Address, Ethernet MAC, Wi-Fi MAC

MusicCast Link

DSP Program (sound mode name), Audio Decoder (decoder name*), IP Address, Ethernet MAC, Wi-Fi MAC

  • *The name of the audio decoder currently activated is displayed. If no audio decoder is activated, “Decoder Off” appears.
NOTE
Available items vary depending on the selected input source. The displayed item can also be applied separately to each input group which is shown in the table and divided by ruled lines.