Setting the MAC address filter
Sets the MAC address filter to limit access to the unit from other network devices.
NOTE
- Operation of the AirPlay function or the DMC is not limited by this setting.
- You can specify up to 10 network devices that are permitted to access the unit. For details, see the following:
Setup menu
“Network” > “MAC Address Filter” > “Filter”
Settings
Off | Disables the MAC address filter. |
On | Enables the MAC address filter. Specify the MAC addresses of the network devices that will be permitted access to the unit. |
Related links
- Checking the network information on the unit
- Setting the network connection method (Wired/Wireless)
- Setting the network parameters automatically (DHCP)
- Setting the network parameters manually
- Setting the use of the Network Standby function
- Setting the MAC address
- Setting the use of a Digital Media Controller
- Setting the use of volume control via AirPlay
- Setting the network name of the unit
- Setting the power interlock from the unit to MusicCast compatible devices