Receiving traffic information automatically
(U.K., Europe, Russia and Middle East models only)
When “TUNER” is selected as the input source, the unit automatically searches for a traffic information station.
Option menu
“Traffic Program”
- When “TUNER” is selected as the input source, press OPTION.
- Use the cursor keys to select “Traffic Program” and press ENTER.
- The traffic information station search will start in 5 seconds. Press ENTER again to start the search immediately.
NOTE
- To search upward/downward from the current frequency, press the cursor keys while “READY” is displayed.
- To cancel the search, press RETURN.
- The following screen appears for about 3 seconds when the search finishes.
NOTE
“TP Not Found” appears for about 3 seconds when no traffic information stations are found.
Related links
- Basic operation of the Option menu
- Option menu items
- Adjusting the tone of the audio output
- Configuring the volume automatically based on the YPAO measurement results
- Adjusting the volume or perceive height of dialogue sounds
- Adjusting the delay of the Lipsync function
- Setting Compressed Music Enhancer
- Correcting volume differences during playback
- Setting the use of Extra Bass
- Enabling the video signal processing
- Selecting a video source to be output with the selected audio source
- Configuring the shuffle/repeat setting
- Switching between stereo and monaural for FM radio reception
- Setting presets for radio stations
- Adding an Internet radio station to the “Favorites” folder
- Removing an Internet radio station from the “Favorites” folder
- Checking the current status information