Linking the standby modes of the unit and the TV
Select whether to use HDMI control to link the unit's standby mode to the TV's power when “HDMI Control” is set to “On”.
NOTE
- For details on “HDMI Control” in the “Setup” menu, see the following:
Setup menu
“Video/HDMI” > “HDMI Control” > “Standby Sync”
Settings
Off | Does not set the unit to standby mode when the TV is turned off. |
On | Sets the unit to standby mode when the TV is turned off. |
Auto | Sets the unit to standby mode when the TV is turned off only when the unit is receiving TV audio or HDMI signals. |
Related links
- Checking the current video and HDMI signal information
- Setting the use of the video signal processing
- Setting a resolution to output HDMI video signals
- Setting an aspect ratio to output HDMI video signals
- Setting the use of HDMI Control
- Setting the audio jack used for TV audio input
- Setting the use of ARC
- Setting the output of HDMI audio from the TV speaker
- Setting the version of HDCP used on the HDMI input jacks
- Setting the use of HDMI Standby Through