Setting the network parameters manually
Set the network parameters (such as IP address, Subnet Mask, and Default Gateway) manually.
Setup menu
“Network” > “IP Address”
- Set “DHCP” to “Off”.
- Use the cursor keys to select “IP Address” and press ENTER.
- Use the cursor keys to select a parameter type and press ENTER.
IP Address | Specifies an IP address. |
Subnet Mask | Specifies a subnet mask. |
Default Gateway | Specifies the IP address of the default gateway. |
DNS Server (P) | Specifies the IP address of the primary DNS server. |
DNS Server (S) | Specifies the IP address of the secondary DNS server. |
- Use the cursor keys to move the edit position and to select a value.
- To confirm the setting, press ENTER.
- To set another parameter, repeat steps 3 to 5.
- Press SETUP.
- This completes the settings.
Related links
- Checking the network information on the unit
- Setting the network connection method (Wired/Wireless)
- Setting the network parameters automatically (DHCP)
- Setting the use of the Network Standby function
- Setting the MAC address filter
- Setting the MAC address
- Setting the use of a Digital Media Controller
- Setting the use of volume control via AirPlay
- Setting the network name of the unit
- Setting the power interlock from the unit to MusicCast compatible devices