Basic procedure for playback
Basic procedure for playing back music is as follows.
- Press z to turn on the unit.
- The center unit and subwoofer are automatically connected via wireless connection. Once the connection has been successfully established, the * indicator on the subwoofer’s rear panel glows, and the unit is ready for playback.
- Turn on the external devices (such as a TV or BD/DVD player, game console) connected to the unit.
- Use the input buttons to select an input source to be played back.
- HDMI: Sound from a device connected to the HDMI IN jack
- TV: TV audio
- ANALOG: Sound from a device connected to the ANALOG input jack
- BLUETOOTH: Sound from a Bluetooth device
- NET: Audio acquired via a network
- The indicator for the selected input source glows.
- Start playback on the external device selected in step 3.
- Press VOLUME (+/-) to adjust the volume.
- When audio is output from both TV speaker and the unit, mute the TV sound.
- Adjust sound settings to suit individual preferences.
NOTE
- If the * indicator on the subwoofer does not glow properly the first time the unit is turned on, pair the center unit and subwoofer manually. For details, see the following:
- For details on adjusting sound settings, see the following:
- For details on playing music files stored on a Bluetooth device, see the following:
- For details on playing audio via a network, see the following:
- To mute the sound, press |. Press | again to unmute.
- When sound input to the HDMI IN jack is output from the TV, the volume level does not change even if you press VOLUME (+/-) or |.
- To adjust the subwoofer volume, press SUBWOOFER (+/-). The subwoofer volume can be adjusted separately from the whole volume.
- When playing audio/video from a device connected to the TV, select TV as the unit’s input source, and select the playback device with the input selector on the TV.