Mounting the sound bar on a wall (for qualified service personnel)

  • Before mounting the sound bar on a wall, be sure to read the following precautions.

Use the screw-hanging holes on the sound bar to mount the sound bar on a wall.

[Search tag]#Q01 Wall mounting

NOTE
  • To bring out the best performance of the sound bar, install the sound bar 3 cm or more apart from the TV.
  1. Attach the mounting template (supplied) on a wall.
  1. Mark the positions for the screws.
  1. Remove the mounting template from the wall.
  1. Install the spacers A (supplied) and screws (sold separately) at the points marked on the wall.
  • Be sure to use screws of the following size.
  1. Peel off the backing paper from the spacers B (supplied), and attach the adhesive face of each spacer to the rear of the sound bar.
  1. Connect cables to the sound bar.
  1. Hang the sound bar on the screws.
  • When installation and all connections are complete, while the power is off, hold down BASS EXT on the sound bar’s remote control for at least five seconds. The sound bar is turned on, and the frequency characteristics are configured to a setting best suited for wall mount installation.