Default settings of the Setup menu
The default settings of the “Setup” menu are as follows.
Speaker
Power Amp Assign | Basic |
Configuration | ||
| Use | |
| Small | |
| Small | |
| Small | |
| None | |
| Small | |
| Front Height | |
| 80 Hz | |
| Normal | |
| Off | |
| Off |
Distance | 3.00 m (10.0 ft) |
Level | 0.0 dB |
Equalizer | Off |
Speaker Impedance | 8Ω MIN |
Test Tone | Off |
HDMI
HDMI Control | On |
Audio Output | Off |
Standby Through | ||
| Auto | |
| On |
4K Upscaling | Off |
HDCP Version | ||
| Auto |
Standby Sync | Auto |
ARC | On |
HDMI Video Format | ||
| 4K Mode 1 |
Sound
Tone Control | Treble, Bass |
|
DSP Parameter | - |
Surround Decoder | ||
| Auto | |
| 0.3 |
All-Channel Stereo | ||
| 0 | |
| 0 | |
| 0 | |
| 5 | |
| Off |
Lipsync | ||
| Auto | |
(This setting is effective when a TV that supports an automatic lipsync function is connected to the unit via HDMI.) | ||
| 0 ms |
Dialogue | ||
| 0 | |
| 0 | |
| - |
Volume | ||
| Maximum | |
| +16.5 dB | |
| Off |
Virtual Speaker | ||
| On | |
| On |
DTS Mode | Mode 1 |
Scene
Scene Setting | - |
Scene Rename | - |
Multi Zone
Information | - |
Zone2 | ||
| ||
| Variable | |
| +10.0 dB | |
| Off | |
| 0 | |
| ||
| Off | |
| On | |
| Off | |
| Auto | |
| 0 ms |
Party Mode Set | ||
| Enable |
Zone Rename | ||
| - | |
| - |
Function
Input Setting | ||
| ||
| Auto | |
| Manual | |
| Off | |
| AUDIO 1 |
DSP Skip | Off |
Trigger Output | ||
| Power | |
| All |
User Interface | ||
| ||
| -2 | |
| dB | |
| On | |
| Bottom | |
| On | |
| Default | |
| Off |
ECO | ||
| 20 minutes | |
| Off |
Tuner | FM50/AM9 | |
(Asia, Taiwan, Brazil, General, and Central and South America models only) |
Initialization | - |
Backup/Restore | - |
Firmware Update | - |
Network
Information | - |
Network Connection | Wired |
IP Address | ||
| On |
DMC Control | Enable |
Network Standby | Auto |
Network Name | - |
MusicCast Link Power Interlock | Off |
Bluetooth
Bluetooth | On |
Audio Receive | ||
| - | |
| On |
Audio Send | ||
| Off | |
| - |
Language
English |