Pairing for the First Time

When first connecting this product to a Bluetooth device (such as a smartphone), follow the steps below to pair (register) this product with that device.

[Search tag] #Q02 Pairing

NOTE
  • You can use Google Fast Pair (described afterwards) to easily pair this product with your Android smartphone.
  1. Remove the earbuds from the charging case.
  • The earbuds will turn on and both earbuds automatically connect. Either earbud (L) or (R) will be the primary earbud, and its indicator lights up as shown in the illustration below as the unit enters pairing standby mode. You will hear the “Pairing” audio message in the earbud. Either earbud (L) or earbud (R) can become the primary earbud.
NOTE
  • The indicators may flash blue for a while after you remove the earbuds from the charging case.
  1. Activate Bluetooth on your Bluetooth device.
  • A list of Bluetooth devices that can be connected will be shown.
  1. Select this product from the list on your Bluetooth device.
  • Select the listing that reads “Yamaha...” and not the listing that reads “LE-Yamaha...”.
  • Once connected, the indicator on the primary earbud lights up as shown below. You will hear the “Pairing Successful” and “Connected” audio messages in the earbud.
NOTE
  • Pairing standby mode will automatically end on this product after about two minutes. To pair again or if the connection was unsuccessful, place the earbuds back into the charging case and start again at step 1.
  • If the earbuds (L) and (R) do not automatically connect, put them back into the charging case and take them out again.
  • This product cannot be paired with devices that require a passkey when pairing as this feature is unsupported.

Connect using Google Fast Pair.

You can easily pair this product with your Android smartphone.

Pairing is supported with Android devices running Android OS 6.0/Google Play 11.7 or later.

  1. Activate Bluetooth on your Android device.
  1. Remove earbud (L) and (R) from the charging case and bring them near your Android device.
  • A notification will be shown on your Android device.
  1. Tap the notification on your Android device.
  • The device will then finish pairing with this product.
  • The indicator on the primary earbud will light up blue for 10 seconds, and you will hear the “Pairing Successful” and “Connected” audio messages in the earbud.
NOTE
  • To use Google Fast Pair, you’ll need to configure your Google account and connect to a network.
Related links