Playing back sound from your audio device

This shows how to play back sound on this product from your audio device.

The following steps show you how to do this from the operating panel. You can also do this in a similar way with the remote control.

  1. Turn the power of the connected audio device on.
  1. Press the [z] power button to turn this product on.
  • If you’re using an external amp, turn it on.
  1. Turn the volume of this product all the way down.
  1. Press the [INPUT] button repeatedly to select the input source from the audio device.
  1. Press the [OUTPUT] button repeatedly to select the audio output destination.
  1. Play back sound on your audio device.
  • Check whether sound is being output by gradually raising the volume.
NOTE
  • If you’ve selected LINE OUT as the output destination, you can’t adjust the volume from this product. In this case, adjust the volume on your external amp.
  • This product can play back two-channel PCM digital audio. If there is a setting on your audio device for digital audio output, use the PCM output (2 ch) setting.