Setting the gain for the headphones

This shows how to set the gain for the headphones. Use the setting that’s appropriate for your headphones. This is the gain setting for LINE OUT that’s used when LINE OUT is selected as the output destination.

Setting menu

“HP GAIN”

“LINE OUT GAIN” (when LINE OUT is selected as the output destination)

Settings (HP GAIN)

HI

Gain: high

Use this setting with high-impedance headphones.

LO

Gain: low

Use this setting with low-impedance headphones.

Default setting

LO

Settings (LINE OUT GAIN)

0dB

The audio signal is output as-is.

ATT

The audio signal is attenuated by passing through an attenuator and then output. Select this when the input level going to an external amp is too loud.

Default setting

0dB

CAUTION
  • A confirmation message appears when you change the setting from LO to HI or from ATT to 0dB. Turn the volume down sufficiently and then press the [ENTER] button to confirm. If you change this setting without turning the volume down, the resulting volume may be extremely loud, which could cause hearing loss.