Errors indicated by the information display

For errors that are shown in the information display, see the following table.

Message

Details

What to do

NOT AVAILABLE

You performed an operation that was unavailable.

Example:

  • Operating the menu while PURE DIRECT is on.
  • Operating a menu for which the settings are unavailable. (When ANALOG is selected as the input source or when PRE OUT or LINE OUT is selected as the output destination, some menu items are unavailable.)
  • Turn PURE DIRECT off, and then try the menu operation again.
  • Change the input source to something other than ANALOG, or change the output destination to something other than PRE OUT or LINE OUT.

REMOTE ID MISMATCH

You tried to operate this product using a remote control for a different Yamaha device.

Use the remote control that was included with this product.

FILE NOT FOUND

The firmware file cannot be found.

Check whether the firmware file is saved on your USB flash drive.

INVALID FILE

The firmware file has been corrupted.

Download the firmware file again and save it to your USB flash drive.

USB OVERLOADED

An error with the USB flash drive connection has been detected.

Use a different USB flash drive.

UPDATE ERROR!

The firmware failed to update.

Try updating the firmware again. See the following information for details.

VERSION ERROR

The firmware failed to update. (Displayed when the unit is turned on)

Try updating the firmware again. See the following information for details.