Specifications

Rated Output Power (2-channel driven)

(20 Hz to 20 kHz, 0.07% THD)

• 8 Ω

100 W + 100 W

Dynamic power (IHF)

• 8 Ω

140 W + 140 W

• 6 Ω

170 W + 170 W

• 4 Ω

220 W + 220 W

• 2 Ω

290 W + 290 W

IEC Output Power (1kHz, 0.07% THD, 8 Ω)

• [Models for U.K. and Europe]

115 W + 115 W

Maximum Effective Output Power (JEITA, 1 kHz, 10% THD)

• [Models for U.S.A., Canada, China, Korea, Australia, U.K., Europe, Russia and for Central and South America]

• 8 Ω

145 W + 145 W

Power Bandwidth (2-channel driven, 0.06% THD, 40 W/8 Ω)

10 Hz to 50 kHz

Damping Factor (1 kHz, 8 Ω)

240 or more

Input Sensitivity / Input Impedance (1 kHz, 100 W/8 Ω)

• PHONO (MM)

3.5 mVrms/47 kΩ

• CD/LINE1/LINE2

200 mVrms/47 kΩ

Maximum Input Signal Voltage (1 kHz, 0.5% THD)

• PHONO (MM)

50 mVrms

• CD/LINE1/LINE2

2.8 Vrms

Rated Output Voltage / Output Impedance

• PRE OUT

1.0 Vrms/1.2 kΩ

• SUBWOOFER OUT (30 Hz)

4.3 Vrms/1.2 kΩ

Headphone Jack Rated Output Power (1 kHz, 8 Ω)

27 mW

Frequency Response

• 20 Hz to 20 kHz (CD etc.)

0±0.5 dB

• 10 Hz to 100 kHz (CD etc., Pure Direct ON)

0±1.0 dB

RIAA Equalization Deviation (Pure Direct ON)

• PHONO

±0.5 dB

Total Harmonic Distortion Plus Noise (2-channel driven) (Pure Direct ON)

• PHONO to PRE OUT (1.0 Vrms)

0.04%

• CD/LINE1/LINE2 to SP OUT (50 W/8 Ω)

0.019%

Signal to Noise Ratio (IHF-A Network) (Pure Direct ON)

• PHONO (MM)

82 dB

• CD/LINE1/LINE2

100 dB

Residual Noise (IHF-A Network) (Pure Direct ON)

• SP OUT

70 μVrms

Channel Separation (JEITA, 1 kHz/10 kHz) (Pure Direct ON)

• CD/LINE1/LINE2

65 dB/50 dB or more

Tone Control Characteristics

• Bass Boost/Cut

20 Hz/±10 dB

• Bass Turnover Frequency

300 Hz

• Treble Boost/Cut

20 kHz/±10 dB

• Treble Turnover Frequency

3.0 kHz

Continuous Loudness Control (Attenuation 1 kHz)

-30 dB

Tuning Range

• [Models for U.S.A. and Canada]

87.5 MHz to 107.9 MHz

• [Models for Asia, Taiwan and for Central and South America]

87.5/87.50 MHz to 108.0/108.00 MHz

• [Models for other areas]

87.50 MHz to 108.00 MHz

50 dB Quiet Sensitivity (IHF, 1 kHz, 100% MOD.)

• Monaural

3 μV (20.8 dBf)

Signal to Noise Ratio (IHF)

• Monaural

69 dB

• Stereo

68 dB

Harmonic Distortion

• Monaural

0.5%

• Stereo

0.6%

Antenna Input

75 Ω unbalanced

Tuning Range

• [Models for U.S.A. and Canada]

530 kHz to 1710 kHz

• [Models for Asia, Taiwan and for Central and South America]

530/531 kHz to 1710/1611 kHz

• [Models for China and Korea]

531 kHz to 1611 kHz

Antenna Input

Loop Antenna

Tuning Range

174.928 MHz to 239.200 MHz (Band III)

Support Audio Format

MPEG 1 Layer II/MPEG-4 HE-AAC v2 (aacPlus v2)

Antenna Input

75 Ω unbalanced

Power Supply

• [Models for U.S.A. and Canada]

AC 120 V, 60 Hz

• [Models for Taiwan and for Central and South America]

AC 110 V, 60 Hz

• [Model for China]

AC 220 V, 50 Hz

• [Model for Korea]

AC 220 V, 60 Hz

• [Model for Australia]

AC 230 to 240 V, 50 Hz

• [Models for U.K., Europe and Russia]

AC 230 V, 50 Hz

• [Model for Asia]

AC 220 to 240 V, 50/60 Hz

Power Consumption

250 W

Standby Power Consumption*

• Network Standby ON, Bluetooth Standby ON

• Wi-Fi (5 GHz)

2.0 W

• Wired

2.0 W

• Network Standby ON, Bluetooth Standby OFF

• Wi-Fi (5 GHz/2.4 GHz)

2.0 W

• Wired

2.0 W

• Network Standby OFF, Bluetooth Standby OFF

0.2 W

• Power OFF (the z (Power) Switch on the front panel is OFF)

0.2 W

• This product in Standby may download the new firmware via the network. In this case, the standby power consumption is increased than the shown value.

Maximum Power Consumption (1 kHz, 8 Ω, 10% THD)

• [Models for Taiwan and for Central and South America]

450 W

Dimensions (W x H x D)

435 x 151 x 395 mm

(17-1/8” x 6” x 15-1/2”)

Reference Dimensions (with wireless antenna upright)

• Including legs and protrusions

435 x 232 x 395 mm

(17-1/8” x 9-1/8” x 15-1/2”)

Weight

11.4 kg (25.2 lb)