About HDMI

The ZG01 supports HDMI signal input of up to 4K/60Hz (for audio: PCM 8 ch., 192 kHz/24-bit).

  • The [HDMI OUT] jack and [USB] jack can be used for outputting livestreaming audio. Configure this in the “STREAMING OUTPUT MIXER” screen of the “Yamaha ZG Controller” dedicated software. The unit outputs to the [HDMI] jack by default.
  • The audio that is output to the [HDMI OUT] jack is 2 ch., 48 kHz/24-bit fixed (video signal passes through).
  • To livestream video, connect a video capture device (commercially available) to the [HDMI OUT] jack.
NOTE
  • HDMI signal pass-through does not work when this product is on standby mode.
  • This product does not support ARC/eARC.
  • Use an HDMI cable (19-pin) that features the HDMI logo when connecting to devices. Also, be sure to use the shortest cable possible to avoid signal degradation.