Connecting to your computer and configuring the settings (Mac)

A driver is required to connect your computer to this product.

The standard driver supplied with macOS can be used as-is, so there is no need to install the driver.

NOTE

Connecting

  1. Remove all USB devices from your computer except for the mouse and keyboard.
  1. Make sure that the volume on this product and on the connected device is turned all the way down.
  1. Use the included USB cable or the USB-C charging cable that comes with your Mac to connect this product to the computer.
  • Connect the devices directly without using a USB hub.
NOTE
  • For Macs that feature a USB-C connector, use the USB-C charging cable that came with your Mac, or use a commercially available USB-C to USB-C cable.
  1. Check whether the LED of the [z] (standby/on) switch on this product is lit.

Settings on the computer

  1. Open “Finder” → “Go” → “Applications” → “Utilities” → “Audio MIDI Setup”.
  1. Select [Yamaha AG03MK2] or [Yamaha AG06MK2] from the list at the left side of the Audio Devices screen.
  • If the Audio Devices screen is not shown, select “Show Audio Devices” from the “Window” menu to make it appear.
  1. Click at the bottom left of the screen and select “Use This Device For Sound Output”.
  1. Similarly, select “Use This Device For Sound Input”.
  • Once you’ve finished steps 3 and 4, the mic and speaker icons at the bottom right of [Yamaha AG03MK2] or [Yamaha AG06MK2] in the list will appear.
  1. Quit “Audio MIDI Setup.”