General specifications
AG06MK2
0 dBu = 0.775 Vrms, Output impedance of signal generator (Rs) = 150 Ω
All level controls are nominal if not specified.
- Frequency response
- Input (MIC) → MONITOR OUT via USB IN/OUT
+0.5 dB/−1.5 dB (20 Hz to 48 kHz @ Fs = 192 kHz) with a nominal output level reference @ 1 kHz, GAIN knob: min, STREAMING OUT: DRY CH 1-2
- Total harmonic distortion *1 (THD+N)
- Input to MONITOR OUT
0.05 % @ 0 dBu (20 Hz to 20 kHz), GAIN knob: min
0.01 % @ +4 dBu (1 kHz), GAIN knob: min
- Hum and noise *2 (20 Hz to 20 kHz)
- Equivalent input noise
- Residual output noise
−128 dBu (mono input channel, Rs: 150 Ω, GAIN knob: max)
−103 dBu (MONITOR OUT, MONITOR knob: min)
- Crosstalk (1 kHz) *3
- −80 dB
- Input channels
- Mono (MIC/LINE): 2, including HEADSET MIC (plug-in power;
- CH 1 MIC and HEADSET MIC cannot be used simultaneously),
- Stereo (LINE): 2, USB IN: 1, AUX INPUT: 1
- Output channels
- STEREO OUT: 1, MONITOR OUT: 1, PHONES: 2
- (headphones output and HEADSET output cannot be used simultaneously), AUX OUT: 1
- Input channel function (CH 1, CH 2)
- PAD
- DSP
- PEAK LED
26 dB
CH1: COMP/EQ, REVERB, MUTE
CH2: COMP/EQ *4, AMP SIM, REVERB, MUTE
LED turns on when the signal reaches 3 dB below clipping level.
- Level meter
- USB OUTPUT level
2 x 2 point LED meter [PEAK, SIG]
- USB audio
- 2 IN / 2 OUT
USB Audio Class 2.0 compliant, Sampling frequency: up to 192 kHz, Bit depth: 24-bit
- Phantom power voltage
- +48 V
- FOOT SW
- REVERB ON/OFF or MUTE (CH 1) ON/OFF
- Power requirements
- DC 5 V, 900 mA
- Power consumption
- Max. 4.5 W
- Dimensions (W × H × D)
- 152 mm × 63 mm × 201 mm (6.0" x 2.5" x 7.9")
- Net weight
- 0.9 kg (2.0 lbs.)
- Included accessories
- USB 2.0 cable (1.5 m), Quick Guide, Safety Guide, Wavelab Cast Download Information, Cubase AI Download Information
- Optional accessories
- FC5 foot switch, third-party mic stand adapter *5
- Operating temperature
- 0 to +40 ℃
AG03MK2
0 dBu = 0.775 Vrms, Output impedance of signal generator (Rs) = 150 Ω
All level controls are nominal if not specified.
- Frequency response
- Input (MIC) → MONITOR OUT via USB IN/OUT
+0.5 dB/−1.5 dB (20 Hz to 48 kHz @ Fs = 192 kHz) with a nominal output level reference @ 1 kHz, GAIN knob: min, STREAMING OUT: DRY CH 1-2G
- Total harmonic distortion *1 (THD+N)
- Input to MONITOR OUT
0.05 % @ 0 dBu (20 Hz to 20 kHz), GAIN knob: min
0.01 % @ +4 dBu (1 kHz), GAIN knob: min
- Hum and noise *2 (20 Hz to 20 kHz)
- Equivalent input noise
- Residual output noise
−128 dBu (mono input channel, Rs: 150 Ω, GAIN knob: max)
−103 dBu (MONITOR OUT, MONITOR knob: min)
- Crosstalk (1 kHz) *3
- −80 dB
- Input channels
- Mono (MIC/LINE): 1, including HEADSET MIC (plug-in power;
- CH 1 MIC and HEADSET MIC cannot be used simultaneously),
- Stereo (LINE) / Mono (guitar): 1, USB IN: 1, AUX INPUT: 1
- Output channels
- MONITOR OUT: 2, PHONES: 2
- (headphones output and HEADSET output cannot be used simultaneously), AUX OUT: 1
- Input channel function (CH1, CH2G)
- PAD
- DSP
- PEAK LED
26 dB
CH1: COMP/EQ, REVERB, MUTE
CH2G *4: COMP/EQ, AMP SIM, REVERB
LED turns on when the signal reaches 3 dB below clipping level.
- Level meter
- USB OUTPUT level
2 x 2 point LED meter [PEAK, SIG]
- USB audio
- 2 IN / 2 OUT
USB Audio Class 2.0 compliant, Sampling frequency: up to 192 kHz, Bit depth: 24-bit
- Phantom power voltage
- +48 V
- FOOT SW
- REVERB ON/OFF or MUTE ON/OFF
- Power requirements
- DC 5 V, 900 mA
- Power consumption
- Max. 4.5 W
- Dimensions (W × H × D)
- 126 mm × 63 mm × 201 mm (5.0" x 2.5" x 7.9")
- Net weight
- 0.8 kg (1.8 lbs.)
- Included accessories
- USB 2.0 cable (1.5 m), Quick Guide, Safety Guide, Wavelab Cast Download Information, Cubase AI Download Information
- Optional accessories
- FC5 foot switch, third-party mic stand adapter *5
- Operating temperature
- 0 to +40 ℃
*1 Measured with 22 kHz LPF.
*2 Measured with A-weighting filter.
*3 Measured with 1 kHz band pass filter.
*4 No switch or knob on the front panel.
*5 For information on available third-party accessories, please refer to the Yamaha Pro Audio website.
https://www.yamahaproaudio.com/
The contents of this guide apply to the latest specifications as of the publishing date.