INSERT screen

The INSERT screen allows you to set the insert patch settings and insert points.

a

INSERT button

Turns insert ON/OFF.

Bypasses the insert when the button is off. Blinks when the Insert Active button on the console is off.

b

INSERT OUT PATCH button

Selects the output source (output port) to the insert.

  • USB :
  • Output to a computer connected to the [USB TO HOST] connector.
  • DANTE :
  • Output to Dante port. Use it to select outputs from stage boxes such as the Tio1608-D connected to DM3 and Dante.

Touch the jump button to open the INSERT OUT PATCH screen.

NOTE

  • DM3 STANDARD cannot be used with Dante.

c

Level meter

Displays the level of the signal output to the insert.

d

Level meter

Displays the level of the signal input from the insert.

e

INSERT IN PATCH button

Selects the input source (input port) from the insert.

  • USB :
  • Input from a computer connected to the [USB TO HOST] connector.
  • DANTE :
  • Input from the Dante port. Use this when selecting an input from a Tio1608-D or stage box connected to DM3 and Dante.

Touch the jump button to open the INSERT IN PATCH screen.

NOTE

  • DM3 STANDARD cannot be used with Dante.

f

Insert Point button

Selects the insert point.

  • Pre EQ :
  • Just before EQ
  • Pre Fader :
  • Just before the fader
  • Post ON :(INPUT channels and MIX channels only)
  • Right after the [ON] key