BUS SETUP screen

The BUS SETUP screen is for changing the basic bus settings (stereo/monorail switching, Pan Link, etc.). These settings are included when saving a scene.

a

Signal type selection buttons

Select the signal processing method for every 2 buses. Selects Stereo (links the main parameters for every 2 buses, arranged in odd/even numerical order) or Mono x2 (used as mono x 2 channels) for each bus.

b

Pre Fader Send Point/Bus Type buttons

For specifying variable send level to Vari or fixed send level to Fixed for sending to the MIX BUS/MATRIX BUS.

Selects the send point when Send Pre under Vari is turned ON.

  • Pre EQ :
  • Just before EQ
  • Pre Fader :
  • Just before the fader

Fixed cannot be selected for the MATRIX BUS.

c

Pan Link button

Turns the Pan Link ON and OFF.

This button is displayed when the Signal Type is set to Stereo. When the button is ON, the pan of the signal sent from the channel to the 2 corresponding buses is linked to the pan sent to the STEREO BUS.