DANTE AUTO SETUP screen

The DANTE AUTO SETUP screen is for automatically configuring the DM3 Sample Rate, Latency and Bit, and auto-patching specified devices.

a

Auto setup devices

Displays available AUTO SETUP devices.

b

DANTE patch display

Displays candidate devices for automatic patching.

The console ID, port number and device name of patchable ports are displayed in green.

If settings cannot be made because the patch destination device is Device Lock, etc., an error icon and red color will be displayed.

c

DANTE setup display

Displays values for the Sample Rate, Latency and Bit set to the patch destination I/O device.

d

Apply button

Starts auto-setup.

The status is indicated as in the example below while loading.

The status is indicated as in the example below when loading is complete.

Touch the Close button to close the screen.

The types of icons are shown below.

Making settings

Settings complete

Timed out

Settings error

NOTE
  • The Tio1608-D does not support connections at a reader clock frequency of 96 kHz. If the DM3 reader clock frequency is 96 kHz and the Tio1608-D is shown in the target devices, a dialog box will appear asking if the reader clock frequency should be changed to 48 kHz. Touch the OK button to set the DM3 reader clock to 48 kHz.