Initialize All Memory screen

The Initialize All Memory screen is for resetting the console's memory, including scene memory and libraries, to the factory default settings.

a

INITIALIZE button

Initializes the internal memory.

The following data is initialized: all scene data, all preset data, mixing data, and setup data.

Touch to display the confirmation message. Touch the OK button to execute initialization.

Do not touch any buttons until the initialization is complete.

When initialization is complete, you can continue maintenance by selecting another menu if you do not press the Exit button.

NOTE

  • When initializing the internal memory, all data stored in the memory is lost. Use caution when performing this operation.
  • The Network settings are also initialized.
  • The Dante module is also initialized (DM3 only).
  • The internal clock is not initialized by this operation.
  • If a Dante device is connected, we recommend turning the power off and on again to reconfigure the connected Dante device.