Input Port Trim screen

The Input Port Trim screen allows you to adjust the gain of specified INPUT jacks in 0.01 dB increments.

a

Analog input gain buttons

Select the INPUT jack that you want to configure here.

Select an INPUT jack and then use the [TOUCH AND TURN] knob to adjust the value.

After making adjustments, start up the console as usual.

b

Reset All button

Resets all values to 0 dB. The factory default is 0 dB.

Touch to display the confirmation message. Touch the OK button to reset.

NOTE

  • When the reset is complete, you can continue to use other maintenance features if you do not touch the Exit button.