Output Port Trim screen

The Output Port Trim screen allows you to adjust the gain of specified OMNI OUT jacks in 0.01 dB increments.

a

OMNI OUT phase buttons

Allow you to change the phase of OMNI OUT jacks.

b

OMNI OUT gain buttons

Select the OMNI OUT jack that you want to configure.

Select an OMNI OUT jack and then use the [TOUCH AND TURN] knob to adjust the value.

After making adjustments, start up the console as usual.

c

Reset All button

Resets all values to 0 dB. The factory default is 0 dB.

Touch to display the confirmation message. Touch the OK button to reset.

NOTE

  • When the reset is complete, you can continue to use other maintenance features if you do not touch the Exit button.