SEND FROM screen

The SEND FROM screen allows you to configure sends from each channel.

a	ON buttons Toggles sends from each channel ON/OFF.

b	SEND PAN sliders Adjust the send pan from each channel. Only shown for MIX 1-6 and MATRIX 1-2 when the Signal Type is STEREO. Not displayed for FX 1-2.

c	SEND LEVEL sliders Adjust the send level from each channel.

d	Pre buttons Allows you to select whether the pre-fader or post-fader signal is sent from each channel. ON: Before the fader OFF: After the fader

SEND FROM screen menu

Swipe left on the menu swipe indicator on the right of the SEND FROM screen to open the following menu.

a	Copy Copies the send levels to the select MIX/MATRIX/FX BUS.

b	All Pre Turns ON all Pre buttons.

c	All Post Turns OFF all Pre buttons.

d	Paste Pastes the send levels you copied to the selected MIX/MATRIX channels.

e	All Nominal Sets all send levels to nominal (0.00 dB).

f	Dup.STEREO Copies each channel's fader level and applies it to the send level.