Effect Parameters
REVERB HD HALL, REVERB HD ROOM, REVERB HD PLATE
These are high dense reverb simulations directly related to Yamaha.
- HD HALL is a simulation of reverb in a concert hall.
- HD ROOM is a simulation of reverb in room acoustics.
- HD PLATE is a simulation of plate echo.
Parameter | Range | Description |
|---|---|---|
Reverb Time | 0.3 s - 30.0 s | Length of reverberation |
Room Size | 0 - 4 | （HALL, ROOM only) Size of space where sound made |
Plate Type | 0 - 2 | （PLATE only) Reverb state |
Initial Delay | 0.1 ms - 200.0 ms | Amount of time before the initial reverberation is heard |
High Damp Freq | 1.0 kHz - 20.0 kHz | Adjusts high band attenuation |
High Ratio | 0.1 - 1.0 | Ratio of high frequency reverberations to Reverb Time. |
HPF | Thru, 21.2 Hz - 8.00 kHz | High-pass filter cutoff frequency. |
LPF | 50.0 Hz - 16.0 kHz, Thru | Low-pass filter cutoff frequency. |
REV R3 HALL, REV R3 ROOM, REV R3 PLATE
Reverbs that use an algorithm directly related to the professional reverberator ProR3
- R3 HALL is a simulation of reverb in a concert hall.
- R3 ROOM is a simulation of reverb in room acoustics.
- R3 PLATE is a simulation of plate echo.
Parameter | Range | Description |
|---|---|---|
Reverb Time | 0.3 s - 30.0 s | Length of reverberation |
Initial Delay | 0.1 ms - 200 ms | Amount of time before the initial reverberation is heard |
High Ratio | 0.1 - 1.0 | Ratio of high frequency reverberations to REV TIME. |
Diffusion | 0 - 10 | Left and right spread of reverberation. |
Density | 0 - 4 | Density of the reverberation. |
HPF | Thru, 21.2 Hz - 8.00 kHz | High-pass filter cutoff frequency. |
LPF | 50.0 Hz - 16.0 kHz, Thru | Low-pass filter cutoff frequency. |
Reverb Delay | 0.1 ms - 200.0 ms | Delay time from initial reverb to reverb sound |
ER/Rev Balance | E63>R - E<R63 | Reverb balance between initial reverb and reverb sound |
Feedback Gain | -99% - +99% | Amount of initial delay feedback |
EARLY REF
1 IN/2 OUT early reflection effect. This effect extracts just the early reflected sound.
Parameter | Range | Description |
|---|---|---|
Type | S-Hall, L-Hall, Random, Reverse, Plate, Spring | Early reflection sound pattern. |
Room Size | 0.1 - 20.0 | Room size (interval between reflections) |
Liveness | 0 - 10 | Decay of the early reflections (0: dead, 10: Live) |
Initial Delay | 0.1 ms - 200.0 ms | Delay until early reflection is heard. |
Diffusion | 0 - 10 | Width of the reflections in the stereo field. |
Density | 0 - 3 | Density of the reflections. |
Feedback Gain | -99% - +99% | Amount of feedback. |
High Ratio | 0.1 - 1.0 | Amount of high-frequency feedback. |
HPF | Thru, 21.2 Hz - 8.00 kHz | High-pass filter cutoff frequency. |
LPF | 50.0 Hz - 16.0 kHz, Thru | Low-pass filter cutoff frequency. |
GATE REVERB
1 IN/2 OUT gate reverb.
Parameter | Range | Description |
|---|---|---|
Type | Type-A, Type-B | Early reflection sound pattern. |
Room Size | 0.1 - 20.0 | Room size (interval between reflections) |
Liveness | 0 - 10 | Decay of the early reflections (0: dead, 10: Live) |
Initial Delay | 0.1 ms - 200.0 ms | Delay until early reflection is heard. |
Diffusion | 0 - 10 | Width of the reflections in the stereo field. |
Density | 0 - 3 | Density of the reflections. |
Feedback Gain | -99% - +99% | Amount of feedback. |
High Ratio | 0.1 - 1.0 | Amount of high-frequency feedback. |
HPF | Thru, 21.2 Hz - 8.00 kHz | High-pass filter cutoff frequency. |
LPF | 50.0 Hz - 16.0 kHz, Thru | Low-pass filter cutoff frequency. |
MONO DELAY
1 IN/2 OUT basic repeating-type delay.
Parameter | Range | Description |
|---|---|---|
Delay | 1.0 - 2700.0 ms | Delay time. |
Feedback Gain | -99 - +99 | Amount of feedback. |
High Ratio | 0.1 - 1.0 | Amount of high-frequency feedback. |
HPF | Thru, 21.2 Hz - 8.00 kHz | High-pass filter cutoff frequency. |
LPF | 50.0 Hz - 16.0 kHz, Thru | Low-pass filter cutoff frequency. |
Sync | OFF, ON | Tempo parameter sync ON/OFF. |
Note | ----, *1 - *14 | Value used to calculate DELAY based on the tempo. |
STEREO DELAY
2 IN/2 OUT basic stereo delay.
Parameter | Range | Description |
|---|---|---|
Delay L | 1.0 - 1350.0 ms | Left channel delay time. |
Delay R | 1.0 - 1350.0 ms | Right channel delay time. |
Feedback Gain L | -99 - +99 | Left channel feedback amount. |
Feedback Gain R | -99 - +99 | Right channel feedback amount. |
High Ratio | 0.1 - 1.0 | Amount of high-frequency feedback. |
HPF | Thru, 21.2 Hz - 8.00 kHz | High-pass filter cutoff frequency. |
LPF | 50.0 Hz - 16.0 kHz, Thru | Low-pass filter cutoff frequency. |
Sync | OFF, ON | Tempo parameter sync ON/OFF. |
Note L | ----, *1 - *14 | Value used to calculate DELAY L based on the tempo. |
Note R | ----, *1 - *14 | Value used to calculate DELAY R based on the tempo. |
DELAY LCR
1 IN/2 OUT 3-tap delay.
Parameter | Range | Description |
|---|---|---|
Delay L | 1.0 - 2700.0 ms | Left channel delay time. |
Delay C | 1.0 - 2700.0 ms | Center channel delay time. |
Delay R | 1.0 - 2700.0 ms | Left channel delay time. |
Delay FB | 1.0 - 2700.0 ms | Feedback delay time. |
Feedback Gain | -99 - +99 | Amount of feedback. |
High Ratio | 0.1 - 1.0 | Amount of high-frequency feedback. |
HPF | Thru, 21.2 Hz - 8.00 kHz | High-pass filter cutoff frequency. |
LPF | 50.0 Hz - 16.0 kHz, Thru | Low-pass filter cutoff frequency. |
Level L | -100 - +100 | Left channel level. |
Level C | -100 - +100 | Center channel level. |
Level R | -100 - +100 | Right channel level. |
Sync | OFF, ON | Tempo parameter sync ON/OFF. |
Note L | ----, *1 - *14 | Value used to calculate DELAY L based on the tempo. |
Note C | ----, *1 - *14 | Value used to calculate DELAY C based on the tempo. |
Note R | ----, *1 - *14 | Value used to calculate DELAY R based on the tempo. |
Note FB | ----, *1 - *14 | Value used to calculate DELAY FB based on the tempo. |
ECHO
2 IN/2 OUT stereo delay with a crossed feedback loop.
Parameter | Range | Description |
|---|---|---|
Delay L | 1.0 - 1350.0 ms | Left channel delay time. |
Delay R | 1.0 - 1350.0 ms | Right channel delay time. |
Delay FB L | 1.0 - 1350.0 ms | Left channel feedback delay time. |
Delay FB R | 1.0 - 1350.0 ms | Right channel feedback delay time. |
Feedback Gain L | -99 - +99 | Left channel feedback amount. |
Feedback Gain R | -99 - +99 | Right channel feedback amount. |
XFeedback Gain | -99 - +99 | Left-to-right, right-to-left feedback gain. |
High Ratio | 0.1 - 1.0 | Amount of high-frequency feedback. |
HPF | Thru, 21.2 Hz - 8.00 kHz | High-pass filter cutoff frequency. |
LPF | 50.0 Hz - 16.0 kHz, Thru | Low-pass filter cutoff frequency. |
Sync | OFF, ON | Tempo parameter sync ON/OFF. |
Note L | ----, *1 - *14 | Value used to calculate DELAY L based on the tempo. |
Note R | ----, *1 - *14 | Value used to calculate DELAY R based on the tempo. |
Note FBL | ----, *1 - *14 | Value used to calculate DELAY FB L based on the tempo. |
Note FBR | ----, *1 - *14 | Value used to calculate DELAY FB R based on the tempo. |
CHORUS
2 IN/2 OUT chorus effect.
Parameter | Range | Description |
|---|---|---|
Frequency | 0.05 Hz - 10.00 Hz | Modulation speed |
AM Depth | 0% - 100% | Depth of amplitude modulation. |
PM Depth | 0% - 100% | Depth of pitch modulation. |
MOD. Delay | 1.0 ms - 500.0 ms | Delay time of modulation. |
Sync | Off, On | Tempo parameter sync ON/OFF. |
Note | *1 - *14 | Value used to calculate Frequency based on the tempo. |
FLANGE
2 IN/2 OUT flanger effect.
Parameter | Range | Description |
|---|---|---|
Frequency | 0.05 Hz - 10.00 Hz | Modulation speed |
Depth | 0% - 100% | Depth of modulation. |
MOD. Delay | 1.0 ms - 500.0 ms | Delay time of modulation. |
Feedback Gain | -99% - +99% | Amount of feedback. |
Sync | Off, On | Tempo parameter sync ON/OFF. |
Note | *1 - *14 | Value used to calculate Frequency based on the tempo. |
SYMPHONIC
2 IN/2 OUT symphonic effect.
Parameter | Range | Description |
|---|---|---|
Frequency | 0.05 Hz - 10.00 Hz | Modulation speed |
Depth | 0% - 100% | Depth of modulation. |
MOD. Delay | 1.0 ms - 500.0 ms | Delay time of modulation. |
Sync | Off, On | Tempo parameter sync ON/OFF. |
Note | *1 - *14 | Value used to calculate Frequency based on the tempo. |
PHASER
2 IN/2 OUT 16-stage phase-shift effect.
Parameter | Range | Description |
|---|---|---|
Frequency | 0.05 Hz - 10.00 Hz | Modulation speed |
Depth | 0% - 100% | Depth of modulation. |
Feedback Gain | -99% - +99% | Amount of feedback. |
Stage | 2 - 16 | Number of phase shift stages. |
HPF | Thru, 21.2 Hz - 8.00 kHz | High-pass filter cutoff frequency. |
LPF | 50.0 Hz - 16.0 kHz, Thru | Low-pass filter cutoff frequency. |
Sync | Off, On | Tempo parameter sync ON/OFF. |
Note | *1 - *14 | Value used to calculate FREQ. based on the tempo. |
PING PONG DELAY
1 IN/2 OUT ping pong delay. The delayed sound alternates between left and right at equal intervals.
Parameter | Range | Description |
|---|---|---|
Delay | 1.0 ms - 1350.0 ms | Delay time. |
Feedback Gain | -99% - +99% | Amount of feedback. |
High Ratio | 0.1 - 1.0 | Amount of high-frequency feedback. |
HPF | Thru, 21.2 Hz - 8.00 kHz | High-pass filter cutoff frequency. |
LPF | 50.0 Hz - 16.0 kHz, Thru | Low-pass filter cutoff frequency. |
Sync | Off, On | Tempo parameter sync ON/OFF. |
Note | ----, *1 - *14 | Value used to calculate DELAY based on the tempo. |
DUAL PITCH
2 IN/2 OUT pitch-shift effect.
Parameter | Range | Description |
|---|---|---|
Pitch 1 | -24 - +24 | Pitch of Ch 1 (semitone increments). |
Fine 1 | -50 - +50 | Pitch of Ch 1 (1 cent increments). |
Level 1 | -100 - +100 | Volume of Ch 1. |
Pan 1 | L63 – R63 | Pan of Ch 1. |
Delay 1 | 1.0 ms - 1000.0 ms | Ch 1 delay time. |
Feedback Gain 1 | -99 - +99 | Feedback level of Ch 1. |
Pitch 2 | -24 - +24 | Pitch of Ch 2 (semitone increments). |
Fine 2 | -50 - +50 | Pitch of Ch 2 (1 cent increments). |
Level 2 | -100 - +100 | Volume of Ch 2. |
Pan 2 | L63 – R63 | Pan of Ch 2. |
Delay 2 | 1.0 ms - 1000.0 ms | Ch 2 delay time. |
Feedback Gain 2 | -99 - +99 | Feedback level of Ch 2. |
Sync | Off, On | Tempo parameter sync ON/OFF. |
Note 1 | ----, *1 - *14 | Value used to calculate DELAY 1 based on the tempo. |
Note 2 | ----, *1 - *14 | Value used to calculate DELAY 2 based on the tempo. |
DELAY notes
- *1 :
- *2 :
- *3 :
- *4 :
- *5 :
- *6 :
- *7 :
- *8 :
- *9 :
- *10 :
- *11 :
- *12 :
- *13 :
- *14 :
DM3 Series