Updating the firmware

Update the sound bar’s firmware. You can also confirm the version of current firmware.

Front display menu

“Firmware Update”

Settings

Network Update

Update performed via a network.

USB Update

Update using a USB flash drive.

Operation method

Refer to “Firmware Update” for information on the operation method.

NOTE
  • You cannot select “Network Update” until you are ready to update the firmware.
  • Use this menu only for updating firmware. Before updating, be sure to check for important information on our web site.
  • A firmware update via a network takes about 20 minutes.
  • If your Internet connection is not fast enough or you are using a wireless network, you may not receive notice of a firmware update. In such a case, it may be better to use a USB flash drive to update the firmware.
  • You can also use “Firmware Update” in the Setup menu to update firmware.